RunRyder RC
WATCH
 1 page 431 views Post Reply
Home✈️Aircraft🚁HelicopterAlignOther › Maiden break-in tommorow.
08-05-2007 01:44 AM  13 years ago
Topic Vote0Post 1
electricdurango

rrVeteran

Sterling, VA

MyPosts All Forum Topic
Maiden break-in tommorow.
Im gonna go do my maiden flight on my new 600N tommorow. Is there anything about nitro Im gonna need to know? I have setup numorous 450's and 600CF lipos before with great results. This will however be my first nitro heli. Heli is equiped as follows:

600N basic
metal tail box
9451's cyclic
GY611 w/9256
3151 throttle
Align 2 in 1
century pipe
os 50 hyper
TP 3400 2s rec batt
Align 600A carbons
batman plastic tail blades

Im gonna run the 50 hyper on Youngbloood 30%n 23% oil.

On breakin Im going to follow specs on hyper, but it only says to run needle 1.5 turns out for the first few flights. Then main needle adjustments slightly per tank. I have heard from other piliots..."just dont load up the disc". What else do I have to look for because I have also been told to tune it from the get go and not to load up the disc.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-05-2007 01:48 AM  13 years ago
baddynergy

rrElite Veteran

sierra madre, ca- usa

MyPosts All Forum Topic
I would go 2 full turns out from closed for breakin. After a 2tanks start leaning it out. Make sure after the second tank the backplate is starting to warm up, but NOT HOT.

I usually go 2 turns because some hypers are a little finicky depending on weather. So it gives you a little safety margin. If its really hot where you are you may want to go a little richer than 2 turns.

Good Luck And HAPPY FLYING
**Unattended children will be givin a shot of espresso and a puppy**
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 431 views Post Reply
Home✈️Aircraft🚁HelicopterAlignOther › Maiden break-in tommorow.
Print TOPIC

 0  Topic Subscribe

Monday, September 21 - 3:43 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online