RunRyder RC
WATCH
 1 page 490 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Changing the Balancer plug....
08-03-2007 02:33 AM  13 years ago
Topic Vote0Post 1
ThunderRobo

rrKey Veteran

Toronto, Canada

MyPosts All Forum Topic
Changing the Balancer plug....
Hey, wondering if i can get a quick answer.

I have a Hyperion 2100 2S pack, and i want to change the balancer plug to the Thunder Power style plug, Which wire goes to which?

Thanks

Derek
Da' kid with the toyz!
"Time for some Muzak!"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-03-2007 05:43 PM  13 years ago
ThunderRobo

rrKey Veteran

Toronto, Canada

MyPosts All Forum Topic
anyone?Derek
Da' kid with the toyz!
"Time for some Muzak!"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-03-2007 11:28 PM  13 years ago
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

MyPosts All Forum Topic
Looks like according to the TP210 balancer manual diagrams that the orange wire is the one not connected in their 2S packs

Black = Pack Negative
Blue = Pack Positive
White = "Common"? Cell #1 positive (black + white)/Cell #2 negative (blue + white)?

I'd assume the center wire of the Hyrperion pack is the "common"? like the TP pack's White wire so I'm guessing if you put your meter positive test lead to it and the negative test lead to the others it'll show positive polarity (+) +4.2v or whatever for Cell#1 and negative polarity (-) -4.2v or whatever for Cell#2 - Otherwise it'll probably show +/-4.2 or whatever from one and +/-8.4 or whatever from the other if that's not actually the "common"? wire
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 490 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Changing the Balancer plug....
Print TOPIC

 2  Topic Subscribe

Monday, September 28 - 12:38 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online