RunRyder RC
WATCH
 1 page 949 views Post Reply
Home✈️Aircraft🚁HelicopterBeginners Corner › Raptor 30 w/ Hitec Optic 6 Setup
07-31-2007 07:21 AM  13 years ago
Topic Vote0Post 1
Eartaker

rrApprentice

Tacoma, WA

MyPosts All Forum Topic
Raptor 30 w/ Hitec Optic 6 Setup
I have finished putting together my V2 Raptor 30 and I am in need of some help on how to properly setup this Hitec Optic 6 for the Raptor. I understand everything but the Mixing. I am also having problems with it being very jerky when i move the sticks, once the main blade hit the tail boom a nice dent. If I move the stick to move the heli forward it will jerk real hard when i return the stick to its original position leaving.Any suggestions on setting?
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-31-2007 05:13 PM  13 years ago
airboss

rrElite Veteran

OC ,california

MyPosts All Forum Topic
optic 6 may need some neg exponential,about 20-30%,on ail and ele.if you have a heading hold gyro such as 401 or 611,you will not need any mixing inputs,leave the mixing in INH mode,or off.lower your cyclic rate in swash to prevent boom strike.good luck.abuse your sim and fly your heli.Urukay HPS3 KSE 700 HPS3
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-01-2007 01:55 AM  13 years ago
Eartaker

rrApprentice

Tacoma, WA

MyPosts All Forum Topic
Ill give it a try, im now also having problems with my blades not wanting to track, hope i didn't bend anything in my head when the blade hit the boom
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-01-2007 02:02 AM  13 years ago
airboss

rrElite Veteran

OC ,california

MyPosts All Forum Topic
you may have twisted the mainshaft or the spindle.replace them or get vibes.also check head dampers,they take a beating.Urukay HPS3 KSE 700 HPS3
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-01-2007 06:44 AM  13 years ago
Eartaker

rrApprentice

Tacoma, WA

MyPosts All Forum Topic
Im replacing the whole head with a new stock plastic head for now to see if will help out the tracking problem
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-01-2007 05:00 PM  13 years ago
airboss

rrElite Veteran

OC ,california

MyPosts All Forum Topic
ballance those mains,and even a slight hit with the rotor will bend mainshaft.good luckUrukay HPS3 KSE 700 HPS3
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2007 09:58 AM  13 years ago
Eartaker

rrApprentice

Tacoma, WA

MyPosts All Forum Topic
WAHOOOOOOO!!!! Today there was just a little wind. I CAN hover, now I have to work on movement. Still working on the pitch/throttle curves to get them more to my comfert
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-02-2007 01:35 PM  13 years ago
Eartaker

rrApprentice

Tacoma, WA

MyPosts All Forum Topic
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-02-2007 04:59 PM  13 years ago
airboss

rrElite Veteran

OC ,california

MyPosts All Forum Topic
good work we are glad to help you out.Urukay HPS3 KSE 700 HPS3
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 949 views Post Reply
Home✈️Aircraft🚁HelicopterBeginners Corner › Raptor 30 w/ Hitec Optic 6 Setup
Print TOPIC

 0  Topic Subscribe

Saturday, September 19 - 4:17 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online