RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3446 views Topic Closed
Home✈️Aircraft🚁HelicopterAlignOther › The Best Solution to the Trex 600N One Way Bearing Problem....
08-04-2007 03:54 PM  13 years ago
casper7

rrApprentice

UK southeast

MyPosts All Forum Topic
Part numbers I assume will be the same as its not an additional part just a part that is the right size and works. The bearing is OK if its got Germany stamped on it, but if you have had a lock up it will need to be replaced as the cage that holds the rollers in place will have distorted when the lock up happened.

I emailed Align and they told me to contact the shop I got the kit from and that what I did, I am surprised more people have not done this, I could not just sit back and accept this and just post on the forums hoping someone has found another bearing I could purchase
SHARE  PM  EMAIL  GALLERY  Attn:RR
08-04-2007 06:01 PM  13 years ago
FlaHeli

rrApprentice

Jacksonville. Fl-USA

MyPosts All Forum Topic
Before Align's attitude was "we don't admit there is a problem so send us the part and we will examine it and make a determination as to whether we will replace it". So this is something new after so many people reported problems. Supposedly when they came out with the second sleeve H60139T that was the new and tighter tolerance, so I am curious to see what's this newest part number and IF it REALLY cures the problem.
SHARE  PM  EMAIL  Attn:RR
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 3446 views Topic Closed
Home✈️Aircraft🚁HelicopterAlignOther › The Best Solution to the Trex 600N One Way Bearing Problem....
Print TOPIC

 7  Topic Subscribe

Wednesday, September 30 - 8:32 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online