RunRyder RC
WATCH
 1 page 723 views Post Reply
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › gv-1 on gasser without stator gator?
07-31-2007 02:19 AM  13 years ago
Topic Vote0Post 1
KINGSPD

rrApprentice

Shreveport, La

MyPosts All Forum Topic
gv-1 on gasser without stator gator?
i was wondering if someone could tell me where they are mounting their sensor at for the gov without the stator gator to the crank case? a picture or just a good instruction would be greatly appreciated.
SHARE  PM  EMAIL  Attn:RR  Quote
07-31-2007 02:44 AM  13 years ago
2fast4-u

rrApprentice

North Cobalt, Ontario .. Canada

MyPosts All Forum Topic
hi

on the crank case by the fuel tank I get a 91% singnal using the magnet from the flywheel

works great and sensor is safe

Ron
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2007 02:48 AM  13 years ago
Ts8103

rrVeteran

Baltimore, Maryland

MyPosts All Forum Topic
I made my own bracket and attached magnets to the fan.
Tone
Team Outrage
YS engines
Switchglo
Baltimore Boyz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2007 04:01 AM  13 years ago
KINGSPD

rrApprentice

Shreveport, La

MyPosts All Forum Topic
thanks for the input, what are you using to hold it to the crank case, goop? if so explain.
SHARE  PM  EMAIL  Attn:RR  Quote
07-31-2007 06:58 AM  13 years ago
Ts8103

rrVeteran

Baltimore, Maryland

MyPosts All Forum Topic
No I just made a small aluminum bracket to bolt the sensor to. The bracket has a arthat goes up into the fan shroud were the sensor is placed.
Tone
Team Outrage
YS engines
Switchglo
Baltimore Boyz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2007 02:07 PM  13 years ago
zone8

rrApprentice

Ireland

MyPosts All Forum Topic
I too use the magnet inside the crank case with 90% reading, check my gallery 9th picture to see the bracket.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2007 02:53 PM  13 years ago
rbort

rrProfessor

Franklin, MA - USA

MyPosts All Forum Topic
Wooden block
I used a wood block on my Spectra-g to mount the sensor. The block was wide enough to use existing holes in the bottom plate and also high enough to put the sensor at the right height to get 97% reading. Wood is non-fragile and the installation is very light and simple. I painted it black to make it blend in better. Check out my gallery I added a photo of it there recently.

-=>Raja.
MA 1005 Hanson 2703D, 4393 flts
Spectra 27 3DMax, 3455 flts
Whiplash V1-2 Hanson 300, 1982 flts
Whiplash V2 Hanson 300, 907 flts
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-01-2007 03:06 AM  13 years ago
KINGSPD

rrApprentice

Shreveport, La

MyPosts All Forum Topic
thanks, i know how im going to mount it now after seeing several pictures of others gassers on the forum.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 723 views Post Reply
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › gv-1 on gasser without stator gator?
Print TOPIC

 4  Topic Subscribe

Friday, September 18 - 11:43 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online