RunRyder RC
WATCH
 1 page 529 views Post Reply
Home✈️Aircraft🚁HelicopterAudacity Models P6 Pantera - Tiger 50 › Rotor Head Assmb Question
07-30-2007 07:32 PM  13 years ago
Topic Vote0Post 1
kovar

rrApprentice

West Chester, Ohio

MyPosts All Forum Topic
Rotor Head Assmb Question
I've removed the 2 head bolts to take the head apart to grease the bearings as per instructions. However I'm having some problem getting it apart (getting the grips offs of the spindle. I'm prob not pulling hard enough but in my experiance, its knowledge, not force to get things done. So before I yank like a madman, any tricks or anything I'm missing?
SHARE  PM  EMAIL  Attn:RR  Quote
07-30-2007 08:35 PM  13 years ago
bsc

rrNovice

Villa Park, IL

MyPosts All Forum Topic
Bolt the blades back on but leave the spindle bolts out then start it up and take it to full throttle. That should do it.

I think you just need to pull harder. Sometimes they are hard to pull off. Be careful though, because when they let go, they come off fast.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-30-2007 09:10 PM  13 years ago
jvanscoyk

rrVeteran

Tucson, AZ

MyPosts All Forum Topic
Try loosing the bolt on 1 side 2 or 3 turns.
Then gently tap the allen driver on the loosened screw and it should knock it loose.

Jim
must go faster, must go faster.........
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 529 views Post Reply
Home✈️Aircraft🚁HelicopterAudacity Models P6 Pantera - Tiger 50 › Rotor Head Assmb Question
Print TOPIC

 3  Topic Subscribe

Monday, September 21 - 7:28 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online