valley park missouri united states
Setups are up to what you are looking for, do you want more 3D or sport flying. If you are going for sport flying and some mild 3D, the esky 3100kv and a 25amp BL ESC will do great. Ditch the stock packs though, I personally use Mega power 1350mah 15C and 20C packs. They are cheap and reliable. Oh and use a 10 tooth pinion, an 11 will get the motor and battery too hot. Stock servos work fine for me, most popular though are hitec 55 for cyclic servos and hitec 50 for tail. Also ditch the stock TX and RX when you can, a good TX (guess you have one for nitro's) is the best way to go. these little birds can get quite touchy on the stock TX and there is no way to adjust expo or D/R.If you want more for 3D, then it depends on how aggressive you want to go. Normal stuff, esky 3800kv. Some guys use HDX300BL w/ 10 tooth, and its actually kinda stupid cause the motor is to small, gets way too hot, but then too those same guys think the packs getting so hot they puff up is ok too,lol, FIRE HAZARD. 9t is ok if you have good air moving through the canopy, that what i have on one right now, and its good. Esky motor has better torque and size to deal with the larger heli, the HDX300BL was designed for the Blade CP Pro/HDX300. FOr serious 3D, JGF 400BL, 4000KV motor is the way to go, run a 9 tooth with a 20C pack and be ready for what you get,lol.Hope that helps, got pics around here that will show what I am running to give you more ideas.If crashin is learnin', Man I failed or wait, I Aced the class!?!?!?!