RunRyder RC
WATCH
 4 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 6863 views Topic Closed
Home✈️Aircraft🚁HelicopterAlignOther › Jason Krause's 600N Pro, almost no upgrades
07-30-2007 05:05 AM  13 years ago
MJHiscott92504

rrVeteran

James Hiscott , Germany for past 11 months

MyPosts All Forum Topic
Be Real
If the 3DX actually robbed your 600N out of 40% power over the plastic fan it would be so noticeable that the owner would take the fan off same day, this is not true, pilots are running there 3DX fans week after week, this 40% power loss over the plastic fan in my opinion is pure fiction, be real......Jim
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 05:07 AM  13 years ago
WJackson

rrElite Veteran

Smyrna, Delaware

MyPosts All Forum Topic
You need a spoon for that pot Hooty?RIP Roman
Bill Jackson
AlignUSA
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-30-2007 05:07 AM  13 years ago
n808

rrVeteran

Seattle, WA - USA

MyPosts All Forum Topic
Jim: that was not his statement. The 3Dx fan takes 40% more power (watts) than the stock fan for an electric motor to drive at 15,000 RPM in a test environment. How much this corresponds to of total engine power in real flight is unknown. It is probably relatively small.
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
07-30-2007 05:24 AM  13 years ago
MJHiscott92504

rrVeteran

James Hiscott , Germany for past 11 months

MyPosts All Forum Topic
Post
Post corrected, misunderstood, sorry
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 05:48 AM  13 years ago
n808

rrVeteran

Seattle, WA - USA

MyPosts All Forum Topic
JK's pipe (Align's upcoming product, JK estimated $60-65):

JK's throttle servo setup, S3155 (to save weight?):
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR
07-30-2007 08:04 AM  13 years ago
steve9534

rrKey Veteran

yakima, wa.

MyPosts All Forum Topic
JK and Trex600
I understood the fan power comment pretty much as n808 stated it. Align has an electric motor they can hook the fan to, and it took 40% more amps to turn the 3dx fan at 15,000 Rpm as the stock fan. Jason said he's not had a problem with the fan magnet as long as it's fitted flush and glued in with a drop of Ca.
The one way bearing was not stock and Jason did give a new prototype to wolfcbr who promptly locked it up on the first flight. He cleaned it with contact cleaner and oiled it. I don't know the followup on that one, whether it now works as advertised or not. I do know it was not stock parts. Happy flying. steve.
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 01:01 PM  13 years ago
hootowl

rrProfessor

Garnet Valley, Pa.

MyPosts All Forum Topic
JK's throttle servo setup, S3155 (to save weight?):
Looks like a quick install either because he didn't have a spare servo after one went out on him or just a quick test. I don't think you'll see that "bracket" on my mod list LOL
Wolves don't lose sleep over the opinions of sheep
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-30-2007 02:44 PM  13 years ago
bsc

rrNovice

Villa Park, IL

MyPosts All Forum Topic
They were not flush as per instructions in manual
The manual does not say anything about the magnets being flush.
If your fan is hitting the shroud, it is because YOU the user did not take the time to install it properly and spin the fan in the shroud to make sure it had clearence. If you are loosing magnets, its because You the user did not make sure you had adequate clearence for your sensor.
My fan had plenty of clearance when I spun it by hand.
The major problem with the stock fan is NOT the fan but the fun hub. It did not run true.
I agree that the major problem is the hub, but when you mix a bad hub with a fan that will easily disort, you are asking for problems. I could not completely tighten my plastic fan down without seriously distorting the fan, so I got it as tight as possible without majorly distorting the fan using plenty of locktite, but this still wasn't enough as I lost two of the screws holding the fan on.

The aluminum fan fixed the problem for me.
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 02:48 PM  13 years ago
DS 8717

rrProfessor

Here wishing i was somewhere else

MyPosts All Forum Topic
Magnet glueing 101:
If you have proper clearance between the magnet and sensor and the magnet hits the sensor,the fan is flexing. If you do not have the magnet glued in good it will come up and hit the sensor.
YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 03:06 PM  13 years ago
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
Im using a 9650 on my throttle and its working great!MSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 04:58 PM  13 years ago
TMoore

rrMaster

Cookeville, TN

MyPosts All Forum Topic
JK used to fly a pretty stock Raptor too.Part 107.
The only ZERO flight hour certificate in the world.
It's like getting a driver's license without the driver's test.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
07-30-2007 05:25 PM  13 years ago
delhezi18

rrApprentice

jakarta,indonesia

MyPosts All Forum Topic
HM.. JK IS Not even a good pilot nowadays.. HE SUCKS, compare to all 3dm masters participants. He is just more to business.

stock Cooling fan does flex, cos, the plastic quality of the cooling fan is not GOOD!....... CNC cooling fan is heavier and takes more engine's energy but it really performs..
SHARE  PM  EMAIL  Attn:RR
07-30-2007 06:02 PM  13 years ago
DS 8717

rrProfessor

Here wishing i was somewhere else

MyPosts All Forum Topic
But since you can lean the engine with the better cooling of the aluminum fan,you get the power back. Then what you have is a fan that doesn't flex.YOU ONLY LIVE ONCE..IF YOU LIVE IT RIGHT THATS ALL YOU NEED
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 06:09 PM  13 years ago
BOOGIE

rrElite Veteran

LAFAYETTE LA

MyPosts All Forum Topic
HM.. JK IS Not even a good pilot nowadays.. HE SUCKS
I dont know about that! Have you seen him fly?
MSH USA / Lynx Heli Innovations
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 06:54 PM  13 years ago
raptor50luvver

rrKey Veteran

Dorset UK

MyPosts All Forum Topic
I dont think you could say he sucks unless you are a far better flier than him

I think his flying is stunning myself
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 08:18 PM  13 years ago
TOSH

rrElite Veteran

UK.Peterborough

MyPosts All Forum Topic
HM.. JK IS Not even a good pilot nowadays.. HE SUCKS
How do l get to be as bad as him.
Flybars. Who needs `em.
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 08:55 PM  13 years ago
inkspot1967

rrProfessor

Cranston Ri

MyPosts All Forum Topic
HM.. JK IS Not even a good pilot nowadays.. HE SUCKS, compare to all 3dm masters participants. He is just more to business.
wow what a nice thing to say about him. i bet jason has forgotten more things then you can even do.....

ive seen jason fly the snot out of many heli's ,including he has flown every heli i have owned. i let him fly it hard so i know i built it right. if it stays together i did something right...lol
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 09:31 PM  13 years ago
Nashville

rrElite Veteran

Formerly Music City now back home in Sunny Florida

MyPosts All Forum Topic
I can't even take delhezi serous anymore after the above nonsensical comment. Here's your sign...I was Spektrum when Spektrum wasn't cool
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-30-2007 09:34 PM  13 years ago
inkspot1967

rrProfessor

Cranston Ri

MyPosts All Forum Topic
trex600crasher
that is sooooooooo true. what a dip **** you know what to put there.
SHARE  PM  EMAIL  GALLERY  Attn:RR
07-31-2007 04:39 AM  13 years ago
LUCKYSTARZZZ

rrApprentice

tacoma wa

MyPosts All Forum Topic
I watched Jason fly 2 days ago up here near seattle at snohomish funfly,
and he was putting it down with his heli
does stupid hurt?
the ground always wins! ..my heli can beat up your heli
SHARE  PM  EMAIL  Attn:RR
WATCH
 4 pages [ <<    <     1     ( 2 )     3      4     NEXT    >> ] 6863 views Topic Closed
Home✈️Aircraft🚁HelicopterAlignOther › Jason Krause's 600N Pro, almost no upgrades
Print TOPIC

 19  Topic Subscribe

Thursday, October 1 - 8:50 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online