RunRyder RC
WATCH |
1 page 408 views | Post Reply |
| RunRyder | RunRyder |
|
|
0| fenderstrat
rrProfessor Aston,Pa |
HELP!! 4in1 Hello all,need some help with the 4in1.Took my heli out flew 2 packs,was flying great.Charged my packs went to fly and my 4in1 wont arm.It flashes red twice then stays red.All connections are fine throttle 0 trim off,in normal not idle up,cyclic works,it just wont arm,any suggestions??also,checked both crystals connections seem fine and fresh batts in txPerformancePlusRC field rep Mini Titan/SE TEAM KBDD |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| Gino CP
rrKey Veteran Philippines |
- 3-in-1 is seeing throttle input - 3-in-1 not seeing any signals from main and/or tail channelsFor #1, clean the rx pins. Put a kink on the legs to grip better.For #3, open the 4-in-1. Split apart teh rx pcb and the 3-in-1 pcb. Clean the exposed pins. Reassemble the 4-in-1.Other than those you are looking at replacing parts. |
| SHARE PM EMAIL Attn:RR Quote | |
| fenderstrat
rrProfessor Aston,Pa |
 .This is perfect timing anyway as I started building my MINI TITAN on Thursday and now I can use my new TX for both!!!I put the pot on the meter and it was dead, took it apart to confirm and the contact strips have worn awayPerformancePlusRC field rep Mini Titan/SE TEAM KBDD |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
WATCH |
1 page 408 views | Post Reply |
| RunRyder | RunRyder |
|
|
Thursday, January 21 - 9:22 pm - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
