RunRyder RC
WATCH
 1 page 388 views Post Reply
05-26-2007 12:49 AM  13 years ago
Topic Vote0Post 1
UCGC

rrApprentice

Colorado

MyPosts All Forum Topic
Plumbing Help
Ok, I just got my carb from OMI for my Cspec (pumped). Can anyone help me with the plumbing. Used to be from tank(s) to Perry Pump to carb and a return to the tank. Plus another line from the tank to the pipe. I know it is different just not sure how to do it...any help. I've searched and found good posts about plumbing for the SZ, but I'm just not sure where the lines go from the perry pump or where the lines for the pipe go. Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
05-26-2007 01:04 AM  13 years ago
UCGC

rrApprentice

Colorado

MyPosts All Forum Topic
I'm thinking that you pull the perry pump and use the nipple in the back plate for tank pressure...am I getting warm
Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
05-26-2007 01:15 AM  13 years ago
z11355

rrMaster

New England

MyPosts All Forum Topic
remove pump

shove the tiny duckbill 1way valve into a piece of tubing. connect
one end to the backplate nipple and the other to the tank pressure
inlet. If you have/want a plastic T, put it before the tank
pressure nipple so you can relieve/vent tank pressure during fuel/defuel.
you'll need to be able to close that vent

then just run line between the tank and the OMI inlet w/ a clamp
on it.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 388 views Post Reply
Print TOPIC

 0  Topic Subscribe

Monday, January 18 - 5:01 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online