WATCH |
1 page 565 views |
Post Reply |
05-24-2007 04:41 AM 13 years ago
| rozzibandit
rrApprentice Big Brown Box |
Question on Throttle and pitch curves for stunt mode... I have been flying for a while but just really forward flight. Rolls, loops, stall turns, high speed circles, etc etc. MY pitch is 12/-10 and throttle set so it won't bog much at all if any.I want to start stunt/3D flying and am setting up a venture cp 30 to practice basic maneuvers with.Do I need to have 0 pitch at mid stick? (+12/0/-12) I have mid stick around +5 in normal mode.What should I set my pitch curve at (5 point curve)? |
| SHARE PM EMAIL Attn:RR Quote |
05-24-2007 05:27 AM 13 years ago
 altima1779
rrKey Veteran Toledo, oh u.s |
I have been told that you should be at 0 pitch when at half stick in all modes. The reason being when you change flight modes you do not want to have a drastic change in pitch. I would suggest the following for a 5 point pitch curve.-10 -5 0 +5 +10 of course if you want more pitch at the top and the bottom that is fine too if your heli can handle it. |
| SHARE PM EMAIL HOMEPAGE GALLERY Attn:RR Quote |
05-24-2007 06:38 AM 13 years ago
| Xircom
rrVeteran Kuala Lumpur - Malaysia |
you definitely need 0deg at middle point, and as for the curve it's just a straight line, everything else will either lead to confusion or jumping between the flight modes or also un-equal behavior of the pitch ... I actually even have a straight line for the normal mode also, although less maximum plus and minus, but the headspeed is also smaller.*** fly more *** |
| SHARE PM EMAIL GALLERY Attn:RR Quote |
05-24-2007 03:07 PM 13 years ago
| rozzibandit
rrApprentice Big Brown Box |
Alright guys. That sounds good to me. -10/-5/0/+5/+10 for all modes.My head speed is going to pick up drastically obviously so the throttle curves will have to be adjusted accordingly. Any tips for doing this easily with out a tach. I usually do it by sound. Done it for years that way. Probably not right or even safe for that matter, but... lol |
| SHARE PM EMAIL Attn:RR Quote |
05-24-2007 03:15 PM 13 years ago
| BarracudaHockey
rrMaster Jacksonville FL |
What motor? If its a 32 I'd go down to 9 top end, a Toki 40 or OS 37 should pull 10 ok.Andy
AMA 77227
http://www.jaxrc.com |
| SHARE PM EMAIL GALLERY Attn:RR Quote |
05-24-2007 03:46 PM 13 years ago
| rozzibandit
rrApprentice Big Brown Box |
The engine is a webra .35 blackhead (comp) engine. High nitro with a custom made pipe by Alan @ Weston UK. SHould say will have the pipe. Being heat treated and I should have it next week. Crap jr stock 2 piece muffler on it now. It has been pulling +11 +12 without really bogging much at all. +10 will be perfect match for it.I noticed I have one blade off a degree (positive) from the other blade. Do I correct that mechanically? And will it put my blades out of tracking?
Thanks for your help so far guys... |
| SHARE PM EMAIL Attn:RR Quote |
05-24-2007 04:39 PM 13 years ago
 flyingmotorbike
rrApprentice Lancs UK |
one blade off by a degree means your tracking is out by a degree |
| SHARE PM EMAIL GALLERY Attn:RR Quote |
05-24-2007 04:51 PM 13 years ago
WATCH |
1 page 565 views |
Post Reply |
3 Topic Subscribe
Friday, January 15 - 8:42 pm - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
0
