RunRyder RC
WATCH
 1 page 2456 views Topic Closed
Home✈️Aircraft🚁HelicopterComputer Flight SimulatorsReflex › Futaba 9C & Reflex XTR
05-22-2007 10:05 PM  13 years ago
Topic Vote0Post 1
speedyjo63

rrNovice

Melaka,Malaysia

MyPosts All Forum Topic
Futaba 9C & Reflex XTR
Need help setting up my radio for Reflex XTR with my Futaba 9C.The radio is setup with Mode 1 and 2 for my Caliber5,I cannot figure out with my radio how to setup the Reflex Simulator with my radio.Will it erase my Mode 1&2????What should I do?????????Thanks a Lot
6 grand in Heli and I still cant Hover
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-23-2007 03:03 AM  13 years ago
pH7

rrKey Veteran

Sterling Heights, MI - USA

MyPosts All Forum Topic
I know you are trying to ask a question here, but I'm not quite sure what the question is. I'll try anyway.

Set up a new model in the 9C that is to be used only for XTR. In XTR, assign the channels as required in the Futaba manual:
1 - aileron
2 - elevator
3 - throttle
4 - rudder
6 - pitch

In XTR, Modify Model Params (F5) either have: (governor on and Transmitter mixing pitch->throttle off) OR (governor off and Transmitter mixing on and set up the thottle and pitch curves in your 9C).

You asked:
Will it erase my Mode 1&2????
I don't exactly know what you are asking, but nothing XTR does will change anything in your radio. YOU may need to change the throttle and pitch curves if you choose that option (above) and so you should have a model dedicated to XTR as I already mentioned.

Hope this helps.
SHARE  PM  EMAIL  GALLERY  Attn:RR
05-24-2007 03:25 AM  13 years ago
gregw

rrApprentice

Hong Kong

MyPosts All Forum Topic
I am using a 9CHP to access Reflex. The following instructions are for you to fly standard governor controlled heli models ("F5" and "Governor" is ticked" ). You won't need to setup curves or anything.

Settings are as follows.

On 9CHP, select a new model, then under "Parameter", "Type", change it to "Acrobatic" (e.g. aeroplane). Go to "Reverse" and set "3:THR" as "REV". I have channel 6 assigned to switch A for throttle hold..

On Reflex, press "F7" to assign channels. My settings for helicopters are:
Tail rotor - 4
Elevator - 2
Aileron - 1
Pitch - 3
Autorotation - 6
Gyro sensibility - 8
SHARE  PM  EMAIL  Attn:RR
05-27-2007 10:52 PM  13 years ago
speedyjo63

rrNovice

Melaka,Malaysia

MyPosts All Forum Topic
Thanks a lot PH7 and gregw,I got it at last,how come im not hovering???????Is there anything wrong with my radio,cos I just got a Futaba Skysport6A for free,cos I have like 15 or so hours on the sim,is that not enough just to get it hover??is there and kind of special setting with this??Again thanks guys.6 grand in Heli and I still cant Hover
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 2456 views Topic Closed
Home✈️Aircraft🚁HelicopterComputer Flight SimulatorsReflex › Futaba 9C & Reflex XTR
Print TOPIC

 1  Topic Subscribe

Sunday, January 17 - 10:51 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online