RunRyder RC
WATCH
 1 page 911 views Post Reply
05-22-2007 06:52 PM  13 years ago
Topic Vote0Post 1
Gearhead

rrMaster

Vt

MyPosts All Forum Topic
upgrades ???
first, please don't tell me I don't need one, cause I want one,,

is there an anti rotation bracket available for the swash on the Sport 50 ??

Jim
Jim
Buzz Buzz Buzz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 06:53 PM  13 years ago
dose

rrApprentice

Glenville, NY

MyPosts All Forum Topic
get a carbon control rod for the tail and consider it an upgrade.---
Vibe 50
Predator MAX Carbon
Adirondack Modelers
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 07:47 PM  13 years ago
Gearhead

rrMaster

Vt

MyPosts All Forum Topic
no, I want an anti rotation bracket for my swash..

Jim
Jim
Buzz Buzz Buzz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 08:51 PM  13 years ago
Isaac F

rrKey Veteran

Panama Republic of Panama

MyPosts All Forum Topic
Well, you can do your own upgrade.

Not sure if this can work, but here is what you will need.
You will need to do a mod to intall the Radius Arm Stay in the frame, maybe remove the aluminum spacer that are in front of the elevator arm and intall the radius arm stay there.

Whay you guys think>

Isaac

404532 - SX 5MM BALL RADIUS PIN

402511 - RADIUS ARM STAY
Speed of light is greater than speed of sound. Some people seem very bright until U hear them speak
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 10:36 PM  13 years ago
SteveH

rrProfessor

Texas

MyPosts All Forum Topic
Jim,

If I were you, I'd get the aluminum elevator "A" arm assembly that goes on the Knight Pro model...it's a direct fit, nothing else needed, and is the comparison of the aluminum unit used on the Predator, only better because it is all aluminum.
The government cannot give you anything without first taking it from someone else.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2007 02:08 AM  13 years ago
beavis1

rrKey Veteran

New York state

MyPosts All Forum Topic
Ok I won't say it just think it LOL
Ha Ha

It is definitly not a need item, but the metal unit will definitly eleminate any movement you think you are going to get.

I thought the stock had a little play myself but flight testing soon put that right out of my mind.
If the swash was rotating the heli would not fly as locked in as it does. It also flips with no roll interaction so it is not twisting.

If you think you need it buy it ! the unit is sweet !! as all the metal bits are for these helis....

Now stop overthinking the heli and get that puppy in the air !
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-23-2007 03:21 AM  13 years ago
Isaac F

rrKey Veteran

Panama Republic of Panama

MyPosts All Forum Topic
If I were you, I'd get the aluminum elevator "A" arm assembly that goes on the Knight Pro model...it's a direct fit
That thing cost $45.00

Isaac

.
Speed of light is greater than speed of sound. Some people seem very bright until U hear them speak
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2007 04:03 AM  13 years ago
beavis1

rrKey Veteran

New York state

MyPosts All Forum Topic
yup
Thats a fair or average price for a metal A arm of good quality.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-23-2007 06:44 AM  13 years ago
Gearhead

rrMaster

Vt

MyPosts All Forum Topic
LOL yeea I know, I haven't even flown it yet and I want upgrades, but that's all I realy want for it,, blades should be here Thursday along with my Raven parts

thanks guys !!
Jim
Jim
Buzz Buzz Buzz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-27-2007 10:38 AM  13 years ago
rspblake

rrApprentice

London uk. coulsdon

MyPosts All Forum Topic
SteveH

"A" arm assembly that goes on the Knight Pro model...it's a direct fit, nothing else needed

Have you fitted one?,as mine needs a spacer

With mine! I had to trim the bottom of the frame, So the ball arm clears the frame, and I had to space the Bottom frame on the brass
spacers.

Found the washers that come as spacers in the radix tail blades are a perfect fit.

Although I did use the brass spacers from the sport,and the pro ones could be longer, I just had A frame laying around without the spacers.

Jim

You will find even will the little movement in the swash with the plastic A arm there is no difference!

They both track great and there is no interaction, there is no real gain in changing.
(gunnell_s) still owes me money! ... web evorc.com
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-27-2007 01:52 PM  13 years ago
SteveH

rrProfessor

Texas

MyPosts All Forum Topic
rspblake,

I fitted the entire assembly from the Pro, and there were no issues at all. Did you use just the "A" arm, or the assembly?

I will agree I saw no improvement in the air. I had actually ordered it for another "project", but decided not to do it, and installed it as an upgrade.
The government cannot give you anything without first taking it from someone else.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 911 views Post Reply
Print TOPIC

 4  Topic Subscribe

Thursday, January 28 - 2:14 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online