RunRyder RC
WATCH
 1 page 491 views Post Reply
Home✈️Aircraft🚁HelicopterMiniature Aircraft Whiplash & Fury 55 › Fury Extreme eCCPM Setup with Futaba 9CHPS
05-22-2007 03:20 AM  13 years ago
Topic Vote0Post 1
JAGNZ

rrProfessor

Auckland, New Zealand

MyPosts All Forum Topic
Fury Extreme eCCPM Setup with Futaba 9CHPS
Ok, just got my new Extreme and trying to setup the CCPM in the radio, what a PITA. My Trex 450 was a snap but this is being a pain.

Ok, this how I have it setup currently:
7CH Futaba Rx
Swash Type: SR1
CH:
1 - Aileron (the right servo when viewed from the front)
2 - Elevator
3 - Throttle (from RevMax Out)
5 - Rudder
5 - Remote Gyro Gain
6 - Pitch (the left servo when viewed from the front)
7 - Power In

Swash AFR:
Ail: +50
Elev: -50
Pit: -50

I am going to setup the TJ RevMax manually using the pot since I don't have a spare channel for remote RPM setting.

The problem I am having is that Pitch and Elevator are reversed. If I add pitch it is like giving forward elevator and vice versa. If I add forward elevator it adds pitch and vice versa. I cannot seem to get it reversed in Swash AFR or via Servo Reversing. Tried swapping the Pitch and Elevator Plugs on the Rx with no luck. Aileron is perfect.

Any advice appreciated.

Jason Greenwood

www.3dheli.co.nz
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 03:31 AM  13 years ago
Ray Fernandez

rrElite Veteran

Guam (U.S.A.)

MyPosts All Forum Topic
On one of my Extremes, using a 9CHPS, the Swash AFR should be:

Aileron +50%
Elevator +50%
Pitch + 50%

See if that'll help getting the servos to move in the right direction.
Ray Fernandez - GUAM
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 03:51 AM  13 years ago
JAGNZ

rrProfessor

Auckland, New Zealand

MyPosts All Forum Topic
Thanks Ray, sorry, my Swash AFR values were exactly like yours, the first ones I quoted were from my Trex (wrong). It's weird, the Elevator and pitch move in the right directions, they are just on the wrong sticks! It is like the servo is plugged into the wrong channel but I think I have it right. When you have a chance could you please tell me which Rx channels your 3 swash servos are plugged into please? I think that is where my problem lies...

Cheers

Jason Greenwood

www.3dheli.co.nz
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 04:48 AM  13 years ago
JAGNZ

rrProfessor

Auckland, New Zealand

MyPosts All Forum Topic
I solved it:

Swash AFR
Ail: -50
Elev: +50
Pit: +50

Had to reverse the servos on the radio for Aileron and Pitch.

Cheers

Jason Greenwood

www.3dheli.co.nz
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 491 views Post Reply
Home✈️Aircraft🚁HelicopterMiniature Aircraft Whiplash & Fury 55 › Fury Extreme eCCPM Setup with Futaba 9CHPS
Print TOPIC

 0  Topic Subscribe

Saturday, January 16 - 2:59 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online