RunRyder RC
WATCH
 1 page 1262 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Raptor 50V2 with a T-Rex 600 head - Equipment added
05-22-2007 02:32 AM  13 years ago
Topic Vote0Post 1
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
Raptor 50V2 with a T-Rex 600 head - Equipment added
Read the last message in here, I've added stuff.

One of my helis is up for sale, I'm probably going to end up parting it out, but I figured I'd give selling it whole a shot. I purchased the heli a week or so ago from a friend, it is a 30V2 that he put 6 flights on, and I put one more on it to make sure everything was good before I converted it. It is fully converted, the only difference from a standard 50V2 is the swash is half plastic, unlike the full metal on the 50V2. Here's the specs:

R50V2
8.5 gear ratio
50 mount, boom and belt
T-Rex 600 head with plastic grips, plastic seesaw, metal flybar cage, plastic mixing arms, metal washout with plastic washout arms modified to fit the Rappy swash
Callie graphics zig-zag pattern in green and graphite

The only thing missing is a fan, I have a Gohbee one I bought from a friend that I'm including, it comes with a governor magnet in it, the original owner drilled a hole through trying to balance it. It works, but I'd buy a real TT one if it were me. The heli has 7 flights, no crashes, no hard landings, everything is perfect. The gears came out of my other 50, part of 2 teeth on the main gear have a chip on them, doesn't effect the operation.

It's all in perfect shape, and the T-Rex head makes for a heli that flies 1000 times better than a regular Raptor, and gives you the ability to run high head speeds. It has nice fast cyclics, and is a lot smoother in forward flight with none of the pitchiness of a regular Raptor head. As it sits now, it's able to get about 9.75 degrees of collective pitch, with a little cutting on the pitch slots on the frame, it's easy to get 11.5 degrees (I've done it on my other one, and can do it for you if you like before shipping). This is a great way to get a heli that flies much better than a Rappy, but still have the low crash costs and wide parts availability. The heli and electronics have never been crashed. I did have the head on a heli that crashed, but it was minor, and didn't result in any damage to the head beyond a scratch on the head button.

I'll sell it for $325 shipped in the US. If it doesn't sell, I'll pull it apart and sell it for parts. I can take paypal, or USPS money order for payment.
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 03:55 AM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
Gotten a couple of PMs. There is no engine, pipe or electronics included. I also forgot to list, I have a metal tail yoke for it that I haven't installed, but will include.

I'll have some pics posted here tomorrow.
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 05:01 AM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
More PMs, some guys aren't familiar with this mod. The 600 head drops right on the stock Raptor mainshaft. There are no mods necessary to the head, or the shaft (or any other Raptor part for that matter). I have another one set up the same way that flies awesome, and was building this to be my backup, but I had a chance to pick up a 600N pro today, and jumped at it, and the wife is going to kill me if I add another heli without getting rid of one.Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-22-2007 02:54 PM  13 years ago
Nathan

rrApprentice

Elkhart, Indiana

MyPosts All Forum Topic
How much for the 600N Pro? Wouldn't want you dead!!

Nathan
SHARE  PM  EMAIL  Attn:RR  Quote
05-22-2007 02:58 PM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
(Insert best used car salesman voice here)

Tell you what kid, you seem like a nice guy, and I really want to work with you. You and the little lady are the kind of people I really like to work with. So just this once, I'll make you a deal. Why don't we say $2000 plus shipping?
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2007 04:11 AM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
Still available. I've added a bunch of stuff, just add your blades, receiver, battery, switch, motor and pipe and you're in the air.

JR 537 servos on cyclic, throttle and tail
Hitec 625MG on collective
Helimax Piezo gyro

This would make a great setup for the beginner who's looking for a great flying heli. The gyro and servos aren't enough for 3d flight, but are fine for learning to fly with. I finally got to try my new 600N today, and honestly, it doesn't fly all that different or better than the Rappy with the 600 head on it.

Still at $325 shipped. If you want a set of Mavrikk 60 carbons with it as well, add $50.
Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2007 05:25 AM  13 years ago
John4Vario

rrNovice

Danville, IL USA

MyPosts All Forum Topic
I'll trade ya for one of my black Newfoundland puppies..Whishing everybody crashless
SHARE  PM  EMAIL  Attn:RR  Quote
05-26-2007 04:36 PM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
I'd do that in a second if I didn't have 3 dogs already.

Here's some pics, guys. Please note that the pitch tray has been cut to make room for the gyro on the front. I'll include another one that is stock if you wanted to go back to stock with the gyro in the back. Also included but not pictured is a header tank, clutch and fan.

Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2007 06:07 PM  13 years ago
Eury

rrProfessor

Dover NH USA

MyPosts All Forum Topic
Sold pending payment.Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1262 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Fuel Helicopters Sold  Raptor 50V2 with a T-Rex 600 head - Equipment added
Print TOPIC

 2  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Monday, January 25 - 1:26 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online