RunRyder RC
rrTV-PHOTO  GALLERIES  MY GALLERY   HELP-FAQ
🚁Helicopter Forum Topic
myHOME PM pmRR MEMBERS 283 ONLINE 1 EVENTS SEARCH REGISTER  START HERE
 3  Topic Subscribe
WATCH
  1 page 704 views Post Reply
Home › ✈️Aircraft › 🚁Helicopter › e-Align › T-REX 450 › Trex 450 V2 interaction
05-21-2007 11:24 PM  13 years ago
Topic Vote0Post 1
mattie-lodge

rrApprentice

Southampton, UK

MyPosts All Forum Topic
Trex 450 V2 interaction
Hi All,

I've just built my trex 450 v2. I've fitted it out with HS65MG servos. I've come to set the swash up and I have found that I have interaction on the swash plate.

Here's what I have done.

Set the swash up at mid stick, level swash plate, all links on the servos are equal distance out, no mixing in the radio.

Now when I raise the collective it tilts the swash right and when I lower it it tilts left. I can trim this out by travel adjust but I've setup a few ccpm models and never had this. It seems the front left swash has more travel then it should.

Has anyone else had this same problem? Any ideas?

Cheers

Matt
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 01:11 AM  13 years ago
0Post 2
rcmarty

rrVeteran

Penticton , B.C. CANADA

MyPosts All Forum Topic
EPA on the servo's to level out te swash at full pitch up and down

Check you manual for the servo numbers, it will make finding the servo easier

Martin What goes up will come down.... one way or another !
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
05-22-2007 08:17 AM  13 years ago
0Post 3
mattie-lodge

rrApprentice

Southampton, UK

MyPosts All Forum Topic
EPA ?

Cheers

Matt
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 02:35 PM  13 years ago
0Post 4
TomRex

rrElite Veteran

West Palm Beach Join Date: 12-28-2005

MyPosts All Forum Topic
end point adjustment......level the swash
Try this for major information input, page links on the left side

http://truebloodengineering.com/mod...=showpage&pid=1Ignorance is the absence of facts.Stupid is lacking the intellectual capacity to comprehend the fact
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-22-2007 07:51 PM  13 years ago
0Post 5
NewRCHeliPilot

rrApprentice

Panama City, Fl.

MyPosts All Forum Topic
Yes this sometime happens, your on the right track just use you're EPA to level it all out, I have heard of using P-mix's but have not a clue as to how. The only other recourse, if it's to bad is to replace the servos and hope for a better match.
.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
  1 page 704 views Post Reply
Home › ✈️Aircraft › 🚁Helicopter › e-Align › T-REX 450 › Trex 450 V2 interaction
Print TOPIC

 3  Topic Subscribe

Sunday, January 17 - 1:08 pm - Copyright © 2000-2021 RunRyder   EMAIL • Enable Cookies

Login Here
 New Subscriptions 
 Buddies Online