RunRyder RC
WATCH |
2 pages [ << < 1 ( 2 ) > >> ] 1786 views | Post Reply |
| RunRyder | RunRyder |
|
|
| CitationX
rrApprentice Danville, IN |
I Agree I couldn't agree more with what Gordy just wrote. The big Futaba wheels have the layout pattern on them. I just keep indexing the wheel around so that I have a layout line and hole at 90-degrees to the linkage by using no subtrim. It works every time. |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| StEdgar
rrNovice Las Vegas, Nevada |
Servo Arms Okay Thanks for the information. I'll make up some new Wheels. I was installing the wheels from the previous owner. They were marked where they came from but don't line up the same. I got new wheels with my servos so it won't be a big deal.Thanks again
Steve |
| SHARE PM EMAIL Attn:RR Quote | |
| ferret
rrNovice victoria australia |
wow i just came across this thread, i have no problem setting up my throttle linkages so that all 90 deg is half throttle and top is throttle stop and throttle bottom is wot...the only dilema is that 1/2 throttle on the ys 91 is 40% throttle so i cant find a way to get the geometry right ? |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| bathmagic
rrVeteran Berwick,Victoria, Australia |
stratus Adriandont worry about it as long as its liner mechanically you will be right as you will either use your govenor or a throttle curve to set the 40% hover point |
| SHARE PM EMAIL HOMEPAGE Attn:RR Quote | |
| ferret
rrNovice victoria australia |
stratus hi dale, yeah i was thinking that but i am a stickler for the whole mechanical setup thing..... but i know with one touch of the screen on my mz it will all be over.... i do all my flight and engine tuning governor off, and set throttle curvs manualy, then turn gov on to make up for the little drops and increases in rpm while flying. |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
WATCH |
2 pages [ << < 1 ( 2 ) > >> ] 1786 views | Post Reply |
| RunRyder | RunRyder |
|
|
Saturday, January 16 - 2:41 am - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
