RunRyder RC
WATCH |
2 pages [ << < 1 ( 2 ) > >> ] 1787 views | Post Reply |
| RunRyder | RunRyder |
|
|
| BEAR
rrApprentice Peterborough |
|
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| wrobijns
rrApprentice Swalmen, the Netherlands |
Or a Metalic rattle? (too lean)If it sounds pretty much fine without any sudden sounds then it should not affect the tail. Is your tail running without friction? Bearings OK? No heavy vibrations? Blade tracking OK?What Gyro? And tail-servo? HH or normal use? Is this also happening in Normal mode? |
| SHARE PM EMAIL Attn:RR Quote | |
| pitfall
rrApprentice england |
wags the heli is fine without the revlock plugged in, tail wags only when i connect it all up.bearings are fine quite a new heli i check all the bearting before i built itgyro is 401 and 9253 servotracking is ok
no vibration.this is getting a pain in the butt, anyone else have problems with the revlock |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| BEAR
rrApprentice Peterborough |
|
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| wrobijns
rrApprentice Swalmen, the Netherlands |
As soon as I engaged my Throttle Jockey my throttle started "hunting". I could see my throttle servo overcorrecting. I tried everything but in the end it was my receiver. ON certain RPM's the vibration would let it malfunction.In your case it could be the crystal or receiver. Can you exchange it for a test?I know it is a long shot but you need one now. |
| SHARE PM EMAIL Attn:RR Quote | |
WATCH |
2 pages [ << < 1 ( 2 ) > >> ] 1787 views | Post Reply |
| RunRyder | RunRyder |
|
|
Wednesday, January 27 - 4:14 am - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
