RunRyder RC
WATCH
 1 page 414 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeOther › Noob Questions about CX???
01-28-2007 09:28 PM  12 years ago
Topic Vote0Post 1
GaFlyer

rrApprentice

Forsyth, GA

MyPosts All Forum Topic
Noob Questions about CX???
Hey guys great forum look forward to learning from everyone!

1) When I get replacement blades I see some small numbers on them,
should I be matching numbers or does it matter?

2)When you take the lowerSwash linkage off does it make a
differance which way the linkage goes back on?

3) Does the Lower Swash Plate fit into the Upper Swashplate or does
it fit right above it? My Lower SP was below and wasnt getting good response from transmitter, now I haved it fitting inside it??!!

Thank for any info GaFlyer
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-28-2007 10:16 PM  12 years ago
TomFoolery

rrApprentice

mandan, ND

MyPosts All Forum Topic
The numbers should be matched, or you will have tracking problems.
Yes it makes a difference which way the links are positioned, the longer holes should be on the bottom.
Only 1 swash plate on the CX, don't know how you would get 2, unless they seperated, if they did seperate, then you should get a replacement.
SHARE  PM  EMAIL  Attn:RR  Quote
01-28-2007 10:48 PM  12 years ago
GaFlyer

rrApprentice

Forsyth, GA

MyPosts All Forum Topic
Thanks for quick response!

One thing though about Lower Sp! In my owners manual for Cx it shows part number 018 as lower SP. Part number 016 as Upper Sp! So according to manual they are seprate parts and on my CX they are seperate! I found a question about this earlier and the guy actually took a picture of Upp and Lower seperated. He was basicly asking same question but no one responded!
I need to get with Horizon Hobby on blades though because several of my lower blades are unreadable.

Thanks again
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2007 03:24 PM  12 years ago
GaFlyer

rrApprentice

Forsyth, GA

MyPosts All Forum Topic
Another Response
I called Horizon Hobby and the Tech. said as long as blades come from same pack, matching numbers doesnt matter! That is good becuase I cant make out numbers anyway
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-31-2007 11:43 PM  12 years ago
TomFoolery

rrApprentice

mandan, ND

MyPosts All Forum Topic
Regardless of what the book calls it, there is only 1 swashplate on the CX, CX2, CP, CPpro, T-Rex, MX450 etc etc etc, in fact the only heli I can think of that has 2 swashplates is a CH56 Chinook heli, and it has 2 seperate rotors, one in the front and one in the rear. E-Flite might be referring to the ROTOR heads, there are 2 of those 1 upper and 1 lower.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 414 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeOther › Noob Questions about CX???
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Friday, November 15 - 11:12 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online