RunRyder RC
WATCH
 1 page 2202 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeOther › Blade CP (not pro) 4-in-1 hack to accept a gyro?
01-28-2007 08:48 PM  12 years ago
Topic Vote0Post 1
heligrom

rrApprentice

Long Island NY, USA

MyPosts All Forum Topic
Blade CP (not pro) 4-in-1 hack to accept a gyro?
hey guys....

is it possible to do this: hack the original blade cp (not pro) 4-in-1 to accept a gyro? i feel that it might be as i know there are two extra channel pins hiding in the back of the receiver area, I'm just not sure how.

has anyone done this or know how to?

thanks

heligrom
T-rex 450S CF, Blade CX, Blade CP, A few planks
SHARE  PM  EMAIL  Attn:RR  Quote
01-28-2007 09:05 PM  12 years ago
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

MyPosts All Forum Topic
The only hack that works on the CP 4-in-1 is to use a different receiver -

The built-in 4-in-1 gyro/mixer can't be disabled to allow another gyro to operate properly - You either have to ditch the CP 4-in-1 and go separates or upgrade to the Pro 3-in-1 which the gyro and mixing can be disabled for use with other gyros.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 06:07 AM  12 years ago
luckyluther

rrNovice

Brantford, Ontario, Canada

MyPosts All Forum Topic
I believe that you can...all the 4n1 is, is a 3n1 and a receiver put together. Once you separate the two you should be able to run your HH gyro. This has been covered on another forum. Go to this link

http://bladecprepair.com/smf/index.php?topic=1021.0

If the link doesnt work go to bladcprepair.com and searh "HH and 4n1"
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2007 06:10 AM  12 years ago
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

MyPosts All Forum Topic
The CP 4-in-1 and the Pro 3-in-1/RX are indeed the same hardware but the Pro 3-in-1 has modified/updated software that allows the gyro and mixer to be disabled to accommodate the use of other gyros - The CP 4-in-1 gyro and mixer can't be disabled so conflicts with other gyros.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 06:33 AM  12 years ago
Gino CP

rrKey Veteran

Philippines

MyPosts All Forum Topic
Now I am confused. I hear people hacking it in and setting gain and proportion to minimum. Now, doubt is in the air.
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2007 06:38 AM  12 years ago
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

MyPosts All Forum Topic
Right - "Minimum" - Not "Off" as there is no such thing as completely "Off" on the CP 4-in-1 - That's the software update of the Pro 3-in-1 making the "Minimum" pot positions completely "Disable" them rather than just "Minimize" them to make it possible to use separate gyros without conflict.

(I looked for the threads from around the time the Pro came out explaining this but couldn't find)
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 07:25 AM  12 years ago
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

MyPosts All Forum Topic
Ok I found the discussions with Jason Merkle from Horizon explaining/confirming this -

http://www.runryder.com/p2149145/
http://www.runryder.com/p2088952/
http://www.runryder.com/p2191656/

BTW - I've tried both a seperate tail ESC and a Pro 3-in-1 with an HH gyro and prefer the behavior of the Pro 3-in-1 over the seperate tail ESC as you don't have to go through arming the tail ESC all the time and it still monitors the throttle and disables the tail ESC at low throttle instead of letting the gyro still drive the tail after crashing or while you're trying to handle the heli even tho you've killed the throttle.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 11:48 AM  12 years ago
luckyluther

rrNovice

Brantford, Ontario, Canada

MyPosts All Forum Topic
WOW thats pretty cut and dry...kinda sucks though...
SHARE  PM  EMAIL  Attn:RR  Quote
01-29-2007 12:08 PM  12 years ago
Gino CP

rrKey Veteran

Philippines

MyPosts All Forum Topic
I wonder if the ESky 3-in-1 has the same firmware.
SHARE  PM  EMAIL  Attn:RR  Quote
02-07-2007 02:45 AM  12 years ago
stickjammer

rrApprentice

Fort Plain ny

MyPosts All Forum Topic
heligrom

would be nice of you to return the heli to the owner sience you said it was a p.o.s.its been over a month now and nothing in the mail owner is getting kinda mad.if you figured you could just keep it you are definatly wrond IT DOES NOT BELONG TO YOU,SEND IT BACK OR MAKE THE TRADE!!!!!
rob
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2007 12:10 PM  12 years ago
Tonic

rrVeteran

Des Moines

MyPosts All Forum Topic
So your saying heligrom is some kind of theaf?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-08-2007 12:36 AM  12 years ago
stickjammer

rrApprentice

Fort Plain ny

MyPosts All Forum Topic
still no reply from this crook,so i guess we will let the authorities where he lives settle it,i do have his name and address so will have to have them go pay a visitrob
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2202 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeOther › Blade CP (not pro) 4-in-1 hack to accept a gyro?
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, November 15 - 2:38 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online