Just checking through my tail setup etc..
Decided to read through here and see what people recommend mech wise for the 401 and specifically the R50.
Now it's said that the servo ball should be the correct distance so that when you give full right rudder and pull the link rod forward, AND the limit pot is set to 100 the ball link will snap on the ball.
Now at the moment I have the limit set to 120 to get this and 13mm on the arm. In order to get 100 I need a 17.5mm distance.
Is this right?, whats better 100 limit and 17.5mm or 120 limit and 13mm.