RunRyder RC
WATCH
 1 page 522 views POST REPLY
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Need help with raptor 50 Bell 222
01-27-2007 04:56 AM  12 years ago
Topic Vote0Post 1
Raptorz499

rrKey Veteran

NJ

MyPosts All Forum Topic
Need help with raptor 50 Bell 222
Hello all,

I just finished my Century Bell 222 with Raptor 50 mechanics and was wondering what type of setup I should have as far as the pitch(min/max in degrees) settings and also the throttle(headspeed). Also, what should cyclic throw be and how much expo if any? My transmitter that I am using is the JR 9303.

Your help would be much appreciated!

Thanks,
Tim
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2007 10:52 AM  12 years ago
Century-Fan

rrApprentice

Vienna/Austria

MyPosts All Forum Topic
My Century Airwolf Settings
Hi Tim!

My Batocpter is a Raptor 50 with Century Airwolf (which is approximately the same fuse as the bell).

My minimumpitch is -5 degrees for good scale flying.
Maximumpitch is ... I dont know. It is given by mechanics and fuse. The "nose" of one part of the mechanics (dont know the right word)=50PV0012 "pitchbridge" is nearby the hatch = maximum.

Mainrotospeed is 1650.

Pitchcurve at the transmitter is modified. Without fuse it was
5-30-50-75-95. Now it is
5-35-60-85-100.

Do you have some pics of your "Beauty Queen"?

Bye

Kurt
BATCOPTER&500E&Bell Assemblingreports (also english) 800 pics
Videos
www.modellhubschrauber.at
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-27-2007 12:29 PM  12 years ago
BarracudaHockey

rrMaster

Jacksonville FL

MyPosts All Forum Topic
I would use blue dampeners and make sure they are well lubed so you can run the lower head speeds w/o nodding.

For pitch I'd say -5 or -6 on the bottom and 9 on the top.

Head speed 1650 sounds about right.

5 or at the most 6 degrees of cyclic with 25 percent expo.
Andy
AMA 77227
http://www.jaxrc.com
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 03:58 AM  12 years ago
Raptorz499

rrKey Veteran

NJ

MyPosts All Forum Topic
Thanks for all the help guys!! I flew the Bell this morning for 3 tanks and it is just simply amazing. My friends were with me and they were in total amazement because I am usually doing 3D with my other raptors and when they saw me flying just nice calm patterns they loved it. I used all the settings that you recommended and it flyies like a dream!

The only problem though is that one of my servos on the left side retract is stripped, or at least I believe it is, because it just keeps running and making clicking noises when I flip the switch to retract the wheels in. When I "help it out" on the retract it stays locked solid. It sure is gonna be a pain to fix this problem.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 04:16 PM  12 years ago
BarracudaHockey

rrMaster

Jacksonville FL

MyPosts All Forum Topic
Good feeling isnt it?

Here's my 230 on its maiden
http://www.bladebusters.com/video_viewer.html?f=42
Andy
AMA 77227
http://www.jaxrc.com
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 04:25 PM  12 years ago
Century-Fan

rrApprentice

Vienna/Austria

MyPosts All Forum Topic
A lotta smoke!
But a beautiful thing!

Kurt
BATCOPTER&500E&Bell Assemblingreports (also english) 800 pics
Videos
www.modellhubschrauber.at
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 522 views POST REPLY
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Need help with raptor 50 Bell 222
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, November 19 - 6:22 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online