RunRyder RC
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 7116 views POST REPLY
01-26-2007 12:25 PM  12 years ago
Topic Vote0Post 1
Dave Wilshere

rrNovice

Hertfordshire

MyPosts All Forum Topic
Razor 600E
Guys

Thought I would jump in with our first Razor 600E to fly in England/maybe Europe!
We are putting two together one with Hacker A50 14s/10s Thunderpower "hot" set up.
The other is going to be our test vehicle for motors etc and reading/looking at other cheaper set ups I noticed that the T-Rex 600 motor speedo is a nice price and seems to work...so find a ratio 18.46:1 and bingo a cheap 6s set up.
I thought this would be good for "hovers" and simple aeros but in the two test flights we have just completed it 3-Ds pretty well.
Didn't take a tacho so I don't know the headspeed but I'm guessing 1900ish on 60cm SAB's
More info as we test this weekend.

Dave Wilshere

SHARE  PM  EMAIL  Attn:RR  Quote
01-26-2007 01:13 PM  12 years ago
blakka_1

rrElite Veteran

London/Enfield

MyPosts All Forum Topic
Nice.
SHARE  PM  EMAIL  Attn:RR  Quote
01-26-2007 04:53 PM  12 years ago
3D Heli Ireland

rrVeteran

Ireland

MyPosts All Forum Topic
Not long to go myself Dave until I am up and ready. This week maybe.Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-27-2007 02:00 AM  12 years ago
busted blade

rrApprentice

orlando,florida

MyPosts All Forum Topic
one day we'll get canopiesbling bling, cha ching......... but honey
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-27-2007 02:08 AM  12 years ago
VKGT

rrElite Veteran

Sanford, NC

MyPosts All Forum Topic
Nice!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-29-2007 01:23 PM  12 years ago
Dave Wilshere

rrNovice

Hertfordshire

MyPosts All Forum Topic
Guys

I grafted an old X-cell 30/46 Graphite glass canopy on while we wait for Razor canopies.
2nd model is complete with a Hacker set up and will fly when the speedo arrives!

Dave Wilshere
SHARE  PM  EMAIL  Attn:RR  Quote
01-30-2007 08:43 AM  12 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
hey , well my Razor ready with its canopy , had the Ion painted kinda like it too , 800 mm 3Dier , yeh!!

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2007 01:08 PM  12 years ago
3D Heli Ireland

rrVeteran

Ireland

MyPosts All Forum Topic
Misskimo

Is that a Lexan canopy or the normal fibreglass??
Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-30-2007 05:04 PM  12 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
hey , its glass , I havent recieved a plastic one yet , painted, it weighs 5 oz , not bad in weight,
3 oz would be great
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2007 07:28 PM  12 years ago
3D Heli Ireland

rrVeteran

Ireland

MyPosts All Forum Topic
Just got my Razor up and running today......Wow

Nuff said...........

Vids and pics to follow soon.
Skookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-06-2007 12:24 AM  12 years ago
OICU812

rrMaster

Edson, Alberta, Canada

MyPosts All Forum Topic
3D Heli Ireland, I look forward to your videos....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-06-2007 10:36 AM  12 years ago
3D Heli Ireland

rrVeteran

Ireland

MyPosts All Forum Topic
I was going to take one on Sunday morning but it was -4 degrees and very foggy. I flew anyway but it wouldn't have made a good vid. When I landed the blades were covered in ice!! Not good...Vids to come soonSkookum Robotics,Sav�x, Motors and Servos,Optipower,SwitchGlo,CML st
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-09-2007 09:18 AM  12 years ago
TURBINE MASTER

rrApprentice

SW ENGLAND

MyPosts All Forum Topic
razor 600e
Hi All
Kit arrived this week excellent quality as expected from miniature aircraft awaiting ratio kit to get it in the air keep up the good work
Turbine Master
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-15-2007 04:15 PM  12 years ago
Dave Wilshere

rrNovice

Hertfordshire

MyPosts All Forum Topic
Ok

I have been flying our second razor fitted with a Hacker A50 and 10s Thunderpower 3850's...rock and roll!

Performance is fantastic, three flights so far and a little more setting up should have it fully dialled in

Dave Wilshere
SHARE  PM  EMAIL  Attn:RR  Quote
02-15-2007 06:29 PM  12 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
Dave , did you get the short packs of the 3850s , about the same lenth as the evos , if you got the long packs , they are good too , 22C , shourt packs are 25C though, and they are Bad to the bone
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2007 08:24 PM  12 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
heres a short video of a test I did after the vegas event , not recomended though , too much power he he , weight was a tad heavy too since I used 12s 3850s , 12s 3300 work great , need to tinker with it some more http://runryder.com/gallery/1611/Ra...hunderPower.zip
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2007 10:10 PM  12 years ago
rcman

rrKey Veteran

Logan, Utah

MyPosts All Forum Topic
Tony, you HV man, looks pretty good
David
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2007 02:41 AM  12 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
hey Tony
ha more power!! grunt grunt!
lookin good man.
chuck
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-16-2007 01:03 PM  12 years ago
stanc

rrKey Veteran

Conroe, TX

MyPosts All Forum Topic
hey , its glass , I havent recieved a plastic one yet , painted, it weighs 5 oz , not bad in weight,
3 oz would be great
Hey Tony, the Canopies are not plastic, they are FB.

Stan
Stan
2- Logo 500
Ion X2
eAvro90
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2007 05:19 PM  12 years ago
misskimo

rrElite Veteran

Alaska 17 years, before mississippi for 31y

MyPosts All Forum Topic
Hey , Stan , YEH! its glass , fiberglass , the plastic one is a aftermarket one ,
still ugly , but not to bad , I do like the Ion canopy better , to bad they didnt make a smaller canopy like the fury
Chuck , and rcman , YEH!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ] 7116 views POST REPLY
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Friday, November 15 - 11:05 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online