RunRyder RC
WATCH
 1 page 1161 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › Step washer goes how??
01-22-2007 09:15 PM  11 years agoPost 1
Lowezz

rrApprentice

Canada

My Posts: All  Forum  Topic

Does the step side make contact with the face of the bearing or does the flat side of the step washer make contact with the face of the bearing? I had to change my spindle and main rotor. Also where do the shims excactly go that I purchased for my cp pro. Do the shims go between the end spindle washer and step washer????

Thanks!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2007 09:18 PM  11 years agoPost 2
Splatcat

rrApprentice

Shandon, CA USA

My Posts: All  Forum  Topic

Direction
Step facing the bearing. Shims go between the oring and the step washer. Go to the e-flightrc site you can view the manual. I know that they have one for the PRO.

PM  EMAIL  Attn:RR  Quote
01-22-2007 10:05 PM  11 years agoPost 3
stickyfox

rrKey Veteran

Rochester, NY - US

My Posts: All  Forum  Topic

Like Splatcat says, the step washer is made to engage with the bearing hub and allow the outer race to spin freely without contacting the washer, so the stepped part should be facing the bearing, and the flat side out.

You can pretty much put the shims anywhere you like, as long as they are against the flat side of one of the step washers. It's better if you have an equal number on each side of the hub, but it's not terribly important. Next to the o-ring is a great place for them.

-fox

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
01-22-2007 10:36 PM  11 years agoPost 4
lowtone20hz

rrNovice

E. Falmouth, MA

My Posts: All  Forum  Topic

Here's a couple of pictures I just saved to my computer because I plan on doing the rebuild soon myself.


Light blue is large washer, purple is stepped washer, and dark blue are bearings.

Also, Horizon's site states the same as above - the shims go between the o-rings and flat side of a stepped washer.

PM  EMAIL  Attn:RR  Quote
01-22-2007 10:41 PM  11 years agoPost 5
Lowezz

rrApprentice

Canada

My Posts: All  Forum  Topic

Thnx!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1161 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › Step washer goes how??
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, September 19 - 7:52 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online