RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 661 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe 90 aluminium ccpm servo holder
11-26-2006 04:06 PM  11 years agoPost 1
Aircrewman

rrNovice

Singapore

My Posts: All  Forum  Topic

Just getting all the electronics up today and discover that Hitec servos cannot be fitted into the aluminium ccpm servo mount.Has anyone encounter this before?If yes,can you advise how to go about getting the servos into the mount without damaging the mount or the servo brackets.

Is it a better idea if in any case Hitec servos cannot be fitted into the aluminium mount to get all JR servos?Is there a significant difference between the current servos which i have 3x 5985MG and 1x5965 with JR servos?I mean in terms of performance and durability?

Which model of JR servos should i get if i decided to replace the current servos?

PM  EMAIL  Attn:RR  Quote
11-27-2006 06:31 PM  11 years agoPost 2
steverobertsuk

rrApprentice

London, England

My Posts: All  Forum  Topic

Aircrewman

I have never used Hitec servos but have seen many large aeoplane and jets being flown with them

Many people say that the controls feel dead when using Hitec servos.

I think that this is due to the fact that they have no 'holding' power. They have a large torque rating which is good but what we need is the servo to stay in that position when under flight loads. Also people are saying that they do not centre as well as other makes of servos.

I personally use JR 8301 servos for cyclic. 6.5kg torque, 0.19 sec, and they have very good resolution.

Hope this helps

Steve Roberts

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 10:01 PM  11 years agoPost 3
rexefekt

rrNovice

Byron Bay, Australia

My Posts: All  Forum  Topic

My vibe has all futaba s9255 servos in it and they have been fantasic, very powerful feel in the heli, and just great with respect to their linearity too.

Sam

PM  EMAIL  Attn:RR  Quote
11-28-2006 12:44 AM  11 years agoPost 4
Aircrewman

rrNovice

Singapore

My Posts: All  Forum  Topic

Guys

Will the futabas fit into the aluminium servo mount nicely?Am thinking of getting JR 8321 for the ccpm setup and any recommendation for the throttle?

Thanks.

PM  EMAIL  Attn:RR  Quote
11-28-2006 03:58 AM  11 years agoPost 5
rexefekt

rrNovice

Byron Bay, Australia

My Posts: All  Forum  Topic

yeah the futaba servos fit in perfectly, no troubles there. I have never ever used JR servos so i cant help you out there.

Sam

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 661 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe 90 aluminium ccpm servo holder
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, June 25 - 3:31 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online