RunRyder RC
WATCH
 1 page 1222 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe w/9303, GY611 & 9256 Setup
11-25-2006 03:37 AM  11 years agoPost 1
CitationX

rrApprentice

Danville, IN

My Posts: All  Forum  Topic

I have a Vibe with an OS.91-SZ (non-pumped), JR9303 tx, and the Futaba GY611/9256 gyro setup. I am so used to the simplicity of the GY401/9254 and just can't seem to get the setup right with the above mentioned electronics. If someone is running the same electronics as what I have above or if someone could just give me the basic elements of setting up the GY611 that would be great.

I have had this continuous tail wag problem and it is to the point where I am considering sending the 611/9256 to Hobby Services to check it out. The tail will twich at the very instant I have the slightest blip in engine RPM. The thing of it is is that I don't know what is causing what!!! The tail has had a persistent tendency to twich like this since I first set it up. Sometimes it can be almost violent which to me would indicate an electronics problem. Not violent enough to piroute or anything but really jerk the tail in the direction of the torque.

I would really prefer to just start over with the entire set up. My last resort will be to go to the trusty dusty 401/9254 but the 611 is a nice unit to give up on! Really need some help here guys!

Thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
11-25-2006 02:51 PM  11 years agoPost 2
mdu6

rrKey Veteran

Montreal

My Posts: All  Forum  Topic

Adjust the gyro sensitivity on the 9303 until it reads 70%.

GO to the 611, scroll (Func) until it shows the sensitivity and use
the +/- (Data) to bring it to 37%.

Fly

If you still have the same behavior, then either the gyro double side
tape is pass due, or the engine is way too lean or way too rich.

If this is not the case, then it's most probably a faulty gyro/servo.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-26-2006 10:36 PM  11 years agoPost 3
Unbalanced

rrVeteran

Melbourne, Australia

My Posts: All  Forum  Topic

I hope this helps (same for the 611):
http://www.jkheli.com/601.htm

Jeff

PM  EMAIL  GALLERY  Attn:RR  Quote
11-27-2006 12:23 AM  11 years agoPost 4
mystar60

rrVeteran

Clifton, NJ

My Posts: All  Forum  Topic

Also check this out if you have not done so already :
http://www.rcheli.com/9303%20with%20futaba%20gyro.htm

Kevin

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-02-2006 04:19 PM  11 years agoPost 5
LaserGecko

rrApprentice

Las Vegas, NV

My Posts: All  Forum  Topic

That URL won't work because of the stupid "%20" (PercentSign20)in the fake autogenerated HTML.

Go to the FAQ section of Rick's and follow the links.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1222 views POST REPLY
HomeAircraftHelicopterJR Heli Vibe 90/50, Sylphide 90, GSR260 › Vibe w/9303, GY611 & 9256 Setup
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Friday, July 20 - 2:34 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online