RunRyder RC
WATCH
 1 page 408 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › blade cp
11-24-2006 08:43 PM  11 years agoPost 1
techop

rrNovice

clay center ,ks, U.S.

My Posts: All  Forum  Topic

I bought a blade cp pro a while back. I swiched to plastic blades and flew it for a while. then put in a g90 gyro and flew more. then had to replace the main frame after a crash. during rebuild I replaced the plastic blades with balsa wood blades. now when i try to fly the tail spins. It holds when the heli is hovering on the ground but as soon as the skids get off and it starts going back and forth, it starts spinning. I dont know if its a bad tail motor or gyro or if the gyro needs reset or something. what should i do?

PM  EMAIL  Attn:RR  Quote
11-24-2006 10:21 PM  11 years agoPost 2
slider46

rrProfessor

Ocala Florida

My Posts: All  Forum  Topic

You either need to set the gyro to hold the tail or you have a motor going out..... Putting a new motor on the tail would be the easiest to change then you know what you have and can adjust your gyro from there.....

Tom..... No "D" flying....

PM  EMAIL  GALLERY  Attn:RR  Quote
11-25-2006 03:14 AM  11 years agoPost 3
techop

rrNovice

clay center ,ks, U.S.

My Posts: All  Forum  Topic

so you think it is the tail motor that is the problem?

PM  EMAIL  Attn:RR  Quote
11-25-2006 03:16 AM  11 years agoPost 4
slider46

rrProfessor

Ocala Florida

My Posts: All  Forum  Topic

That would be my first guess unless you have a problem with the gyro setup.....Trouble shooting is the only way to figure it out..

Tom..... No "D" flying....

PM  EMAIL  GALLERY  Attn:RR  Quote
11-25-2006 03:54 AM  11 years agoPost 5
fiatracer163

rrNovice

Milwaukee Wi

My Posts: All  Forum  Topic

the blade cp and cp pro blow out tail motors all the time. I think you should smell the tail motor and if it smells like my moms cooking (burnt and crispy) then you probably need a tail motor, with the battery unpluged...

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 408 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Other › blade cp
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, July 17 - 1:24 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online