RunRyder RC
WATCH
 1 page 488 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › 450SE, 401&9650 set up ?
11-21-2006 10:34 PM  11 years agoPost 1
rotory

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

I was wondering whats the set up for this combo?
I was fine with my old HS56, then I listened to every one telling me to change my servo and since I switched to Fut9650, I can't seem to stop the tail waging. PLEASE HELP

For your info..

1- Gyro (Digital Servo = ON) & (Delay Limit = 0)

2- Servo-Horn lenght is about 10 mm from center to center. I got the right servo-travel-limit setting only after adjusting it to minimum in order to avoid binding.

3- JR Tx (Travel adjust for Rudder = +/- 86%) & (Gear = +65 for HH & -60 for Normal)

Any help is appreciated. Let me know your specs if you got this combo working well for you.

thanks
bob

PM  EMAIL  GALLERY  Attn:RR  Quote
11-21-2006 10:37 PM  11 years agoPost 2
colsy

rrElite Veteran

Cambridge, UK

My Posts: All  Forum  Topic

Mine are set at around 6/6.5mm on the arm (re-drilled).

Colin.

Only Quote From Experience.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-21-2006 11:42 PM  11 years agoPost 3
marlin847

rrApprentice

Pelion SC USA

My Posts: All  Forum  Topic

mine is set to digital servo on
delay set to 0
gain set to 100
hole closest to the center on the stock round horn that came on servo
On the gyro sensitivity i have 40% act heading hold 40 out of heading hold
travel adjust just adjusts the piroetee rate how fast is spins mine is 100 85 is fine on yours
adjust the servo forward or backward on the boom so the tail blade slider sits just left of center or towards boom

not a wag in the world with this setup. Hope this helps. Happy Thanksgiving. Marlin

PM  EMAIL  Attn:RR  Quote
11-22-2006 04:49 PM  11 years agoPost 4
marc8090

rrElite Veteran

Long Island, N.Y.

My Posts: All  Forum  Topic

The servo arm needs to be short enough to get the limit up around 100 with no binding. A good starting gain setting is around 40%. Your gain seems to high, especially with the long servo arm you're using.

PM  EMAIL  Attn:RR  Quote
11-23-2006 04:45 PM  11 years agoPost 5
rotory

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Thanks all, appreciate your help. I'll get to it this week end.

thanks again

bob

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 488 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › 450SE, 401&9650 set up ?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, July 21 - 4:53 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online