RunRyder RC
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 3351 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › Got a berg 7p today and it is worse than electron6 HELP anyone!!!
10-28-2006 02:33 AM  12 years ago
Jon the Rooster

rrElite Veteran

Johns Island, Charleston, SC

MyPosts All Forum Topic
Nice!!!! So the 146i cost you $80 tho????
It dont mater what you spend when you get a good flight in!!
and one more thing "DON'T BE AFRAID!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2006 03:01 AM  12 years ago
flyride

rrKey Veteran

Salt Lake City UT

MyPosts All Forum Topic
Ya it was $80 through heliproz but the berg just cost me $50 and it dont work and I still couldnt fly.So $80 for a reciever that works is fine by me.and the blonde said "RECTUM, Hell damn near killed em!!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2006 09:11 PM  12 years ago
flyride

rrKey Veteran

Salt Lake City UT

MyPosts All Forum Topic
Got to my local hobbie store on saterday with the berg for them to test out and they said it was defective and gave me a new one and we tested it at the shop and it works great but now I have 2 because I just bought the futaba 146i, oh well looks like I will have to get another heli and the blonde said "RECTUM, Hell damn near killed em!!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2006 09:13 PM  12 years ago
ShellDude

rrElite Veteran

East Coventry, PA

MyPosts All Forum Topic
good deal! I'd been following this thread hoping for a happy ending with your berg given my own experience. I'd be willing to bet CC has some QC issues with the berg takeover.~~OCHC~~
http://www.glumbert.com/media/spiders
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2006 09:20 PM  12 years ago
caseyjholmes

rrElite Veteran

Portland, Oregon

MyPosts All Forum Topic
Just like I said..
"was it dropped in the hobby shop or something?"
Must have been the case, or something similar.
Glad to here it worked out for you now go fly the crud out of your rex!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2006 10:12 PM  12 years ago
oopsididitagain

rrVeteran

Dubai

MyPosts All Forum Topic
to be honest is berg7p really a good rx , and can it be used with the JR 7202?

cause i would like to buy the dx7 but for that price i could have bought a futaba 7chp or the JR 7202 with the berg rx + another TREX barebone

pls advise
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-04-2006 10:36 PM  12 years ago
MikeInMobile

rrElite Veteran

Mobile, Alabama

MyPosts All Forum Topic
Yes, just set the 7202 to PPM mode for the transmitter ..... everything else is automatic with this receiver!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2006 11:04 PM  12 years ago
oopsididitagain

rrVeteran

Dubai

MyPosts All Forum Topic
really? did you have the same configuration? is it true that with this receiver u will never ever get a glitching problem?
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-05-2006 01:52 AM  12 years ago
MikeInMobile

rrElite Veteran

Mobile, Alabama

MyPosts All Forum Topic
The onboard microprocessor will prevent the receiver from registering a large spike. This receiver operates 1 frame set behind the transmitter. This allows the receiver to compare the position to the position from the previous frame. If the delta travel is too great, the receiver will see it as a glitch, and will not send it to the servo. If the fluctuation is small, the receiver will not see it as a glitch, and will foward the signal to the servo.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-08-2006 03:19 AM  12 years ago
helibull

rrApprentice

virginia

MyPosts All Forum Topic
i need to see your install on everything...
im about 100% shure i know the problem as well as the question with the answer? i had the exact same issue...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-08-2006 06:24 AM  12 years ago
drdot

rrElite Veteran

So. California, Orange County.

MyPosts All Forum Topic
fwiw..

There is no comparison between the Berg and the SS DX radios...the Berg is still 1930s rf technology...Combine the DX 7 with the new micro DX 6100 rx and it is probably the ultimate setup for any micro/ mini e-heli...

John.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-08-2006 06:39 AM  12 years ago
oopsididitagain

rrVeteran

Dubai

MyPosts All Forum Topic
helibull do post your solution if u think that is what it is
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-08-2006 07:55 AM  12 years ago
helibull

rrApprentice

virginia

MyPosts All Forum Topic
(radio shack ) ferrite ring line choke .....
its not the lttle ring but a a little black box w/ a magnet shaped like a tunnel wrap your speed control lead going to your receiver from speed control 2-3 times thru it end of story also it is im portant to use the proper crystle.. for that receiver the choke is about 3.60 cents
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-08-2006 04:51 PM  12 years ago
DonDon

rrNovice

Alberta,Canada

MyPosts All Forum Topic
Again the fact remains- Since using the supposedly inferior DX6 I have not experienced one glitch, not a twitch nothing-My trex is a rock in hover. It's only a matter of time before your $1000 TX/RX are rendered useless by the 12 year old down the street with his RC truck and he buries your $300 helicopter.So I am saving hundreds of dollars by supposedly down grading to the DX6, But I think safety and always being in control more than make up for this.
SHARE  PM  EMAIL  Attn:RR  Quote
11-09-2006 02:37 AM  12 years ago
drdot

rrElite Veteran

So. California, Orange County.

MyPosts All Forum Topic
fwiw...

To paraphrase Weird Al..."another one see the light"
Go Spektrum!

John.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-09-2006 04:24 AM  12 years ago
curlyq2000

rrApprentice

Hayden, Idaho

MyPosts All Forum Topic
I too am a Berg 6 faithfull too, However
Yes I own a whole fleet of Berge 6 recievers, I LOVE THEM!
(3 helis) & (5 planes) was 6 planes.
I have never had issues with my helis and the Berg 6.
However lately, 2 planes, have had issues, and I lost one.
1) was a Berg 5 (the only one) kept cutting the motor, I replaced it with a new Castle Berg 4, no problems.
2) was a new Berg 6 (I have plenty) running 18V with UBEC, and digital servos, had flown atleast 20 times with no issues, until one day, no good range check with antenna down, only up one link.
I fly a 9Z with "NO" Synth. I use a ch35 modual.
Needless to say I went up anyway, flew for 10 min. then went up after touch and go, came around after take off, It then locked out and crashed.
We did the same range check with the reciever using a batt pack it checked out fine, even range check.
I will run Ferrite ring & separate batt. pack on the new plane.
AND NEVER FLY AFTER A GLITCHY RANGE CHECK!
that was the first time in 2 years and 8 models had a problem with the range check on the Berg 6.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-09-2006 07:30 AM  12 years ago
Justin911

rrVeteran

San Diego, CA - USA

MyPosts All Forum Topic
first time i have heard this about any berg reciever... those in my oppinion are the best recievers on the market for the price!
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
11-15-2006 02:03 PM  12 years ago
Joe Ford

rrNovice

Olathe, KS USA

MyPosts All Forum Topic
You gents are following instructions and range checking with the heli at least 4ft off the ground, correct? Tried pulling the rx off and range checking on it's own? If so, and it's still doing it, try another xtal. If that doesn't work gimme a call so we can fix you up. We're always happy to help...just give us a call or email.

joeford@castlecreations.com
913-390-6939 ext. 119
Product Specialist for Castle Creations
SHARE  PM  EMAIL  Attn:RR  Quote
11-20-2006 03:22 AM  12 years ago
johnmemphis

rrNovice

memphis,tn

MyPosts All Forum Topic
...
SHARE  PM  EMAIL  Attn:RR  Quote
11-20-2006 03:43 AM  12 years ago
Jay Mowl

rrApprentice

Owosso Mi. USA

MyPosts All Forum Topic
Just purchased a Berg 7 and I am extremely happy with it. Would not hesitate to buy another.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1      2     ( 3 )    >    >> ] 3351 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › Got a berg 7p today and it is worse than electron6 HELP anyone!!!
 Print TOPIC  Make Suggestion 

 8  Topic Subscribe

Wednesday, October 16 - 11:00 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online