I am relatively new to RC helicopters and need some help on radio setup.
I have just built a new Sceadu Evo 50. I have set it up mechanically, measuring all linkages using callipers etc., and ensuring that all servo arms are 90 degrees when they should be with level swash plate etc.. This has been no problem and I am happy that the airframe is now set up accurately mechanically.
I am now faced with programming the 9ZAP so that I can set 0 degrees pitch at the centre point of the collective lever and then to have linear pitch and throttle curves - for a basic hover setup.
My problem is that once I have selected the heli mode on my radio I find that a number of parameters are adjustable on the side slider pots - for example altering the throttle and pitch curves near the centre stick position. To complete my setup I would like to inhibit these adjustments (for example to set the 0 degree pitch position at the centre of the collective.
Is there an easy way of inhibiting all these non-linear fine tuning parameters (PCV, PHV, PTM, TCV etc) without having to go all the way through resetting every single point on every parameter?