RunRyder RC
WATCH
 1 page 402 views Post Reply
09-10-2006 10:35 PM  14 years ago
Topic Vote0Post 1
Safer

rrNovice

Middle of Norway

MyPosts All Forum Topic
Jr 9xII setup GV-1
Have som trouble setting up Futbas GV-1 on my new JR 9xII.
Tryed the same two mixes as my Jr 3810 but somthing does not match.

Someone have a solution for setting up GV-1 to JR 9xII?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2006 10:52 AM  14 years ago
Safer

rrNovice

Middle of Norway

MyPosts All Forum Topic
With the mix from JR3810 I can change the headspeed. But it won`t change from Normal to FlightMode1 and FlightMode2. The Gear I use for my gyro, so that is not a option. Worked like a charm on my JR3810.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2006 05:00 PM  14 years ago
mrNoodles

rrProfessor

Borlänge, Sweden

MyPosts All Forum Topic
Connect the GV AUX RPM lead to AUX3 on your RX.
Change in the DEV SEL menu so AUX3 is controlled by the flightmode switch.
No mixes needed.

Or connect it to AUX2 and use the AUTO setting in the GYRO SENS menu.
Setting the values to 0% in normal, 50% in idle1 and 100% in idle2 should make the GV switch from S1 to S2 to S3 when flipping the flightmode switch.

Good luck!
/Fredrik
'Hm now I just have to find out where to connect the GV1 sensor to the Jazz80 ESC.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-11-2006 07:54 PM  14 years ago
Safer

rrNovice

Middle of Norway

MyPosts All Forum Topic
Thanks.
I use AUX3 so i will try this later this evening.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2006 09:21 PM  14 years ago
Safer

rrNovice

Middle of Norway

MyPosts All Forum Topic
Thanks again.

Works like a sharm.
Orbit have a BEC that has a good governour function I think.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 402 views Post Reply
Print TOPIC

 1  Topic Subscribe

Thursday, December 3 - 1:28 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online