RunRyder RC
WATCH
 1 page 456 views Post Reply
Home✈️Aircraft🚁HelicopterKyosho Caliber/Quest Neo-Caliber series › Caliber 30 and mechanical setup for EMS
09-10-2006 03:17 PM  14 years ago
Topic Vote0Post 1
Arthur Dent

rrNovice

Finland

MyPosts All Forum Topic
Caliber 30 and mechanical setup for EMS
Hi!

I know that this thread have been lot of discussion, but could you help me anyway.

I changed the all three servos from Hitec to Futaba and also the link set from Rcheliworks. Now I get pitch setup which is 10 to -8 so its 18 degrees. I have Eclipse 7 and the EPA/ATV are 100% and the SWASH setup is 70, -70 and 70. If I use 125% EPA/ATVs then I'll get 12 to -10 which sound great but then I'll get binding when moving right stick to lover right corner so the swashplate is 45 tilt angle.

If I have understand correctly there should be 20 degrees to use so 10 to -10 sounds ok??

But how about autorotation? Is there 12 deg the need?

AD
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-11-2006 04:18 AM  14 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
Don't know if you've run across this thread,

http://www.runryder.com/t206926p1/

but it contains a good mechanical setup description for the EMS system. Complete with pics, it will get you an even amount of +/- travel in the collective, should get you the collective range you need as well. One of the key ingredients is to get the distance from the center of the servo output arm to the point where you connect the ball to the link. The manual recommends the distance to be 10 - 11 mm. You may end up having to shorten the links between the flybar and the MR grips by a couple of millimeters to get what you're after.

Dave
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 456 views Post Reply
Home✈️Aircraft🚁HelicopterKyosho Caliber/Quest Neo-Caliber series › Caliber 30 and mechanical setup for EMS
Print TOPIC

 2  Topic Subscribe

Sunday, November 29 - 4:14 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online