RunRyder RC
WATCH
 1 page 466 views Post Reply
Home✈️Aircraft🚁HelicopterComputer Flight SimulatorsReflex › Configuration Reflex XTR with FF7CHP
09-09-2006 09:05 AM  14 years ago
Topic Vote0Post 1
Jahisom

rrNovice

Barcelona-Spain

MyPosts All Forum Topic
Configuration Reflex XTR with FF7CHP
I am completely lost. I do not know how to set up correctly the reflex with my Futaba FF7. Which chanel assign to autorotation and gyro?. How to adjust the gyro sensibility,
Is there any instruction for dummies.
Thank you from Spain
Jahisom
SHARE  PM  EMAIL  Attn:RR  Quote
09-09-2006 02:47 PM  14 years ago
pH7

rrKey Veteran

Sterling Heights, MI - USA

MyPosts All Forum Topic
The Futaba transmitter determines which channel is assigned to the gyro gain. With Futaba, I believe this is always channel 5, but check your manual to be sure.

What you do for autorotation depends on whether you have the "Transmitter mixing pitch->throttle" option checked in the "Model parameters" menu. Hit F5 to get to this menu.

If you have this option checked, then you don't need to assign a channel for autorotation. You do need to set up your Throttle Hold option on you transmitter, just like you would for a real model to do an autorotation. (This is the way I do it.)

If you do not have this option checked, then you need to set up your transmitter. Pick a switch and assign it to an available channel (probably channel 7 in your case). Then in XTR assign that same channel.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 466 views Post Reply
Home✈️Aircraft🚁HelicopterComputer Flight SimulatorsReflex › Configuration Reflex XTR with FF7CHP
Print TOPIC

 1  Topic Subscribe

Friday, November 27 - 2:24 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online