RunRyder RC
WATCH
 1 page 541 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › What blades are you logo 14 flyers using?
09-07-2006 08:13 PM  14 years ago
Topic Vote0Post 1
Jag72

rrProfessor

South of Boston

MyPosts All Forum Topic
What blades are you logo 14 flyers using?
I am getting ready to set up my new logo 14 carbon and was wondering if I should run 550's or 600's?

right now it's only set for 550's....but I'm going to be running an HV 10s system with a Tango motor....just wondering what others are using on their 14's?

I fly 600's on my logo 20 right now on 6s and it's a little too much blade for 6s...I'm sure 10s would power 600's no prob but is there any real benefit to running the 600's?

I can't really seem to decide?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-07-2006 10:03 PM  14 years ago
Lorents

rrElite Veteran

Oslo, Norway

MyPosts All Forum Topic
Hi,

I use the white Mikado 580 blades. Have tried MS 600's and some razors but there is something about these 580's that makes the L14 fly really well. I think they work really well for hovering, FFF, 3D flying and autos.


What comes around goes around.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-07-2006 11:02 PM  14 years ago
comet

rrVeteran

Neuilly sur Seine, Fr

MyPosts All Forum Topic
Yes

use larger blades if you have a "torquy" motor and a slow headspeed, and if you want to lift.

short blade for speed
large blades for torque

I'm running as well mikado's 580's and dont see any reason to swap them


not only the span matters, but also the cord and the profil
VT "slow&low"
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-07-2006 11:35 PM  14 years ago
f_sea

rrApprentice

Los Angeles

MyPosts All Forum Topic
Mikado 580's work well on my 10s L14 3d setups.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2006 12:31 AM  14 years ago
OICU812

rrMaster

Edson, Alberta, Canada

MyPosts All Forum Topic
a bigger balde of course will be abitmore stable, and will auto better. The BBT 580s are good as mentioned as well light set of 600 Vblades work well too, just havr to remember if you are running Vs' to only run 10/10 pitch range....Once upon a time there were Nitros, flybars and frequency pins...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2006 06:49 PM  14 years ago
Jag72

rrProfessor

South of Boston

MyPosts All Forum Topic
Thanks guys....
looks like I'm going to try the mikado 580's first...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-08-2006 08:18 PM  14 years ago
Andreas_S

rrApprentice

Albstadt, Baden-Württemberg, Germany

MyPosts All Forum Topic
Mikado 580
MS Composit 570
V-Baldes 600

All blades works fine on the Logo 14. As said above lower pitch to + - 10° when using the V-Blades. On the others I fly 12° to 13°.
Team Mikado, Team Flightpower, Logo 500 3D VBar :: Logo 14 VBar ::
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 541 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › What blades are you logo 14 flyers using?
Print TOPIC

 4  Topic Subscribe

Wednesday, December 2 - 12:15 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online