RunRyder RC
WATCH
 1 page 533 views Post Reply
Home✈️Aircraft🚁Helicoptere-BladeOther › PLaY in the head....
09-07-2006 04:30 AM  14 years ago
Topic Vote0Post 1
K.J.

rrApprentice

Fayetteville, North Carolina

MyPosts All Forum Topic
PLaY in the head....
...Then ALL OF A SUDDEN i hear a pop when I'm hovering. I check to see what it was and one of the bearings in the blade grip goes inside the blade grip instead of staying at the edge of the hole where its supose to be. I'd fix it and put the bearing back where it was but then it would pop inside the blade grip again, broke my tail housing and boom on one incident. Whats Up?
*SNIFF* ahhhhh..the smell of fresh new blades *SNIFF*
SHARE  PM  EMAIL  Attn:RR  Quote
09-07-2006 05:10 AM  14 years ago
lryansl

rrApprentice

Yuma, Arizona

MyPosts All Forum Topic
There should be a spacer inside of the blade grip?
SHARE  PM  EMAIL  Attn:RR  Quote
09-07-2006 10:00 PM  14 years ago
K.J.

rrApprentice

Fayetteville, North Carolina

MyPosts All Forum Topic
There are spacers in the blades but it still seems to do it. I even tried the long silver ones and still happened. *SNIFF* ahhhhh..the smell of fresh new blades *SNIFF*
SHARE  PM  EMAIL  Attn:RR  Quote
09-08-2006 12:00 AM  14 years ago
sven

rrNovice

winnipeg, manitoba, canada

MyPosts All Forum Topic
I had exactly the same thing happen. If you look at your other blade grip, you will see a little "shoulder" that is supposed to hold the bearing in. I guess they have some lousy grips that don't have them. You just need a new grip.

Evan
SHARE  PM  EMAIL  Attn:RR  Quote
09-08-2006 12:33 AM  14 years ago
K.J.

rrApprentice

Fayetteville, North Carolina

MyPosts All Forum Topic
I just bought new blade grips though *SNIFF* ahhhhh..the smell of fresh new blades *SNIFF*
SHARE  PM  EMAIL  Attn:RR  Quote
09-24-2006 12:54 PM  14 years ago
Jimmi

rrKey Veteran

Southern Ca. U.S.A.

MyPosts All Forum Topic
If the bearings are popping out seems like your blades are not tight enough and make sure your using the right screw for the blade grips. If the screw is not the same size and a little longer you will have blade grip play. I ran into this problem and almost drove me nuts. Good luck, Jimmi Or try this

http://www.bladecprepair.com/index.html
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 533 views Post Reply
Home✈️Aircraft🚁Helicoptere-BladeOther › PLaY in the head....
Print TOPIC

 3  Topic Subscribe

Saturday, December 5 - 9:42 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online