RunRyder RC
WATCH
 1 page 747 views Post Reply
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityIkarus › Need help Eco 8 servo / rx connections
09-06-2006 02:49 PM  14 years ago
Topic Vote0Post 1
LorenzoJ

rrNovice

Norwood, MA USA

MyPosts All Forum Topic
Need help Eco 8 servo / rx connections
Building an Eco 8 with Airtronics Super 6000 tx, Hitec servos and Hitec Electron 6 rx. Setting up with 90 deg electronic mix. Where on the rx and how do I setup the left / right aileron servos. Manual is less then detailed in this regard. Thanks
SHARE  PM  EMAIL  Attn:RR  Quote
09-07-2006 04:25 AM  14 years ago
mjdee14

rrApprentice

Nashville , TN

MyPosts All Forum Topic
Rd6000
Lorenzo..

If you have the radio manual look at pages 7 and 71.

The radio must be set up for the type ow swash plate you have see pg 71 for types....

page 7 shows the elevator in chan#1 the aileron on the heli right side in chann #2 on rx and pitch servo on left side in channel #6

the only diference in the two 90 deg swashes is whether your elevator servo is in the front or the back...on the eco 8 it's in the back so set the radio for ccp4 B and you should be OK.... If the Electron 6 is different...just plug in one servo at a time and move the sticks to figure out which channel moves which servo.....then place the servos as the diagram shows.....elevator in back...ail on the right...pitch on the left (as seen from the cockpit) PM me if you need more
info.

http://www.airtronics.net/RD6000_Super.htm you can dowload the manual here if you need it.

Mike
Mike... Blade CP, HBCP2, Revo w/belt drive, Zoom 400, Eco 8, Hurricane 550, DX7 2.4
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 747 views Post Reply
Home✈️Aircraft🚁Helicoptere-Elec-Helicopters New or Limited ActivityIkarus › Need help Eco 8 servo / rx connections
Print TOPIC

 2  Topic Subscribe

Saturday, November 28 - 10:31 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online