RunRyder RC
WATCH
 1 page 458 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Need some help to program my 14 MZ
09-05-2006 07:10 PM  14 years ago
Topic Vote0Post 1
Ringoboy

rrNovice - Sweden MyPosts All  Forum  Topic

Need some help to program my 14 MZ
Hi there

Is there anybody that can help me to found out how to program this radio so that the ruder trimmer T4 is just active when I´m in normal mode and not in headinghold mode with the gyro. I use the H Switch to change between headinghold and normal.

Before I had an Multiplex Evo 9 and this radio has this function and I liked it alot.

I have 3 flightmode Hover, IdleUp and Hold.

Best regards Anders Nordahl
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
09-05-2006 09:03 PM  14 years ago
Ilkka

rrNovice

Oulu, Finland

MyPosts All Forum Topic
Hi,

I think the most reasonable way to do it is to introduce separate flight condition for normal gyro. Then you could get rid of T4 for AVCS mode by using function menu and define Trim function to be condition aware and define trim rate 0 for AVCS conditions.

Actually I don't know any other ways and propably you need to adjust also other parameters than gyro mode meaning separate mode is needed anyway.

- Ilkka
SHARE  PM  EMAIL  Attn:RR  Quote
09-06-2006 09:37 AM  14 years ago
J2M

rrVeteran

UK

MyPosts All Forum Topic
Here's an idea which doesn't require you to set up a new condition - not tried it but it should work:

- define T4 as the master control for one of the virtual channels in the Function menu e.g. VC1

- Set-up a VC1 to Rudder linear PMIX that exactly offsets any T4 trim input. The PMIX would be switched by switch H and active only when H is in your "normal" position
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2006 11:27 AM  14 years ago
Ringoboy

rrNovice

Sweden

MyPosts All Forum Topic
Thanks for the help J2M

I have tried what you suggest and I have just got it to work.

Best Regards Anders Nordahl
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
09-06-2006 11:31 AM  14 years ago
J2M

rrVeteran

UK

MyPosts All Forum Topic
Your welcome. Glad it worked

Jeremy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 458 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Need some help to program my 14 MZ
Print TOPIC

 3  Topic Subscribe

Tuesday, November 24 - 1:14 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online