RunRyder RC
WATCH
 1 page 1192 views Post Reply
09-05-2006 06:49 PM  14 years ago
Topic Vote0Post 1
BJames111

rrElite Veteran

San Diego, California

MyPosts All Forum Topic
servo horns
I plan to use JR8311 servos in my aurora, and I was wondering what servo arms would be best to use. I would like to use the wheel style like futaba has, but I don't know of a wheel that fits JR.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2006 07:20 PM  14 years ago
Auggie

rrElite Veteran

US

MyPosts All Forum Topic
As long as the distance between the holes is 25mm (12.5mm to center) any heavy duty one from JR should work.

Augusto.
Avant Aurora Ultimate
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2006 07:34 PM  14 years ago
ScottG

rrVeteran

Ft Wayne, Indiana

MyPosts All Forum Topic
Part number 98324 from Airtronics

http://www.shopatron.com/product/pr...607.594.595.0.0

These are the wheels that I used on the Vigor CS to get those major throws that the standard JR wheels and arms can't give.

Scott
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 07:44 PM  14 years ago
JKos

rrProfessor

Redondo Beach, CA

MyPosts All Forum Topic
Those heavy duty Airtronics wheels are excellent for use with JR servos. They are bit larger than you need on the Avants and the Aururo, but they are nice and thick for minimal flex.

- John
RR rules!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 08:23 PM  14 years ago
BJames111

rrElite Veteran

San Diego, California

MyPosts All Forum Topic
great, I think I'll try the airtronics arms. I would have to buy 3 packs of dubro heavy duty jr servo horns to get the 3 I need!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2006 09:00 PM  14 years ago
I3DM

rrProfessor

Israel

MyPosts All Forum Topic
The airtronics round HD horns work really well.www.liorzahavi.com
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-30-2008 07:20 AM  12 years ago
derekandjennys

rrApprentice

Cedar Rapids, IA

MyPosts All Forum Topic
this is an old thread but with the new 8717s I NEED a set of these and they are being or are discontinued. Anyone know where I can get some.

Derek
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2008 07:58 AM  12 years ago
Dood

rrProfessor

Wescanson

MyPosts All Forum Topic
I measure 12.5mm from Center to middle hole on my Airtronics horns.

They are at Tower Hobbies
http://www3.towerhobbies.com/cgi-bi...?&I=LXTT14&P=SM

and then there are these for JR
http://www.horizonhobby.com/Product...?ProdID=JRPA219

or these HD ones from JR.
http://www.horizonhobby.com/Product...?ProdID=JRPA216
^^^Im not sure on the distance from center on the outer holes. They look kinda small in the pic, but I think thats what you want.
  ▲
▲ ▲
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2008 06:24 PM  12 years ago
derekandjennys

rrApprentice

Cedar Rapids, IA

MyPosts All Forum Topic
Thanks but they are not big enough. The 98324 Airtronics wheel is the only thing I have seen acceptable for MA stuff and I can''t find any.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-28-2008 06:28 PM  12 years ago
Clarence Creer

rrVeteran

Fort Worth, Texas

MyPosts All Forum Topic
AIR98324
Check with redneckrc.com

Clarence
Team Kontronik Team minicopter/PeakAircraft
VTeam EvoPowerBattery
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1192 views Post Reply
Print TOPIC

 4  Topic Subscribe

Sunday, November 29 - 8:24 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online