RunRyder RC
WATCH
 1 page 741 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › MP2 cross section
09-05-2006 01:18 PM  14 years ago
Topic Vote0Post 1
Yug

rrMaster

UK. Herts

MyPosts All Forum Topic
MP2 cross section
I was wondering if anyone has cut an MP2 in half (along its length) and has a picture of it.
Vegetable rights and Peace
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 01:24 PM  14 years ago
matman

rrVeteran

White Oak Texas USA

MyPosts All Forum Topic
I was wanting to see one as well."Respect my Authoritiah!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 01:26 PM  14 years ago
matman

rrVeteran

White Oak Texas USA

MyPosts All Forum Topic
Someone had several others on here I think. Maybe he has crashed one with a MP2 since then and cut it as well."Respect my Authoritiah!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 01:37 PM  14 years ago
colsy

rrElite Veteran

Cambridge, UK

MyPosts All Forum Topic
Like This.

Colin..
Only Quote From Experience.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2006 01:41 PM  14 years ago
Yug

rrMaster

UK. Herts

MyPosts All Forum Topic
Excellent, thanks alot.
The reason I'm wanting this pic is to see how the gas flows as I'm looking into adding a smoke system. If I were to place the smoke oil inlet on the manifold, it would be very close to the fuel pressure nipple, so some smoke oil could make it's way into the fuel tank.
Vegetable rights and Peace
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2006 07:47 PM  14 years ago
JR_Vibefreak

rrApprentice

Bangkok Thailand & UAE Dubai

MyPosts All Forum Topic
Lean running
wow looks cool
Looks like that bose sound system inside lol
GIXXER4LIFE Philipp
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-06-2006 07:55 PM  14 years ago
andres.c

rrKey Veteran

pan

MyPosts All Forum Topic
guy

30percent nitro is not enough smoke Damm what you trying to do with your heli mosquito control also

LOL

once you get is working i want to see a video of it
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2006 08:08 PM  14 years ago
Yug

rrMaster

UK. Herts

MyPosts All Forum Topic
Today the smokin heli design has started. I was flying my R50 at lunchtime and the engine bearings eventually got so bad, I had to stop. So the engine has been stripped and bearings replaced. I'm going to refit it with a cline regulator and crank pressurised fuel system. The benefit here is bags of good clean pressure with the added bonus that the bearings should last longer due to the lack of nitric acid. This also means the now unused pressure nipple on the manifold can be used as a smoke oil inject point. The crank pressure will drive the smoke oil from a tank into a valve, then through a preheater pipe wrapped round the manifold and finally into the manifold. Hopefully tons and tons of smoke to do some skywriting. Vegetable rights and Peace
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 741 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › MP2 cross section
Print TOPIC

 3  Topic Subscribe

Wednesday, November 25 - 5:53 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online