RunRyder RC
WATCH
 1 page 653 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Fromeco switch???
09-04-2006 02:22 PM  14 years ago
Topic Vote0Post 1
Ironside

rrApprentice

Baltimore, MD

MyPosts All Forum Topic
Fromeco switch???
Im having a problem with my Arizona Regulator. I cant get the power to shut off unless I unplug the battery. I have the flag pin setup and initially thought that it had took a crap. So to test it, I unplugged the flag pin and took a servo extension and closed the circuit twisting the red & black wires together - still would not turn off. So this leads me to believe that the flag pin itself is good and there may be a problem on the board. Correct? If anyone could shed some light on the situation I'd appreciate it.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2006 03:10 PM  14 years ago
Blademan7065

rrVeteran

Greenfield, Ma.

MyPosts All Forum Topic
dumb question, Are you sure that you are plugged into the switch lead. THere are quite a few leads comming off the reg. Not all of the AZ reg that I got were labeled.

Just a thought.

Good luck
Fromeco Rep
Magnum Fuel Rep
Jersey Modeler Rep

Check out my homepage
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-04-2006 03:21 PM  14 years ago
Learn to Fly

rrKey Veteran

Yalesville Connecticut

MyPosts All Forum Topic
You get power, from the gyro gain lead, to the rx. black plug is for checking battery or charging.

Jeff

Jeff
Believe nothing you hear, and half of what you see...
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-04-2006 03:30 PM  14 years ago
Blademan7065

rrVeteran

Greenfield, Ma.

MyPosts All Forum Topic
every Reg that I have gotten the plugs on the end of the leads have been a different color. I have ordered 7 or 8 of them in total.Fromeco Rep
Magnum Fuel Rep
Jersey Modeler Rep

Check out my homepage
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-04-2006 03:33 PM  14 years ago
Learn to Fly

rrKey Veteran

Yalesville Connecticut

MyPosts All Forum Topic
Mine were colored per the instructions, but they were backwards. When I put the gain plug into their instructed spot I got 6 volts at my gyro and 5 at my GV1 and servos. I reversed the plugs and all works fine now. 6 volts at my GV1 and servos and 5 at my GY611. I was puzzled at first but I got it to work and test flew it 5 times now.

Jeff

Jeff
Believe nothing you hear, and half of what you see...
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-04-2006 03:52 PM  14 years ago
rookie5

rrVeteran

Harlow, Essex - United Kingdom

MyPosts All Forum Topic
the arizona regulator still draws current even when you turn it off by the switch but it doesnt draw that much

it actually tells you it draws current in the off position if you read the instructions....
SHARE  PM  EMAIL  Attn:RR  Quote
09-04-2006 04:09 PM  14 years ago
Ironside

rrApprentice

Baltimore, MD

MyPosts All Forum Topic
I am positive that I am plugged into the correct lead. I have been flying this setup for a few months now. It just all of a sudden quit stop working for me yesterday. I've had it hooked up per the instructions since I got it a few months ago and all has been fine until yesterday. I do appreciate the responses but if you guys have anymore suggestions please let me know. I am going to give Fromeco a call later today but if there is somethig that I can try in the meantime I would like to go ahead and get it fixed.

Thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2006 06:26 PM  14 years ago
Blademan7065

rrVeteran

Greenfield, Ma.

MyPosts All Forum Topic
I am sorry I missunderstood your post. I thought that this was a new set up to you. If you are haveing this type of problem get in touch with Kurt at Fromeco. I am sure he will help you out in a way that will make sence for both you and himself. They have been very helpful in the past when I have had a concern or problem.

Good luck
Fromeco Rep
Magnum Fuel Rep
Jersey Modeler Rep

Check out my homepage
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2006 09:45 AM  14 years ago
gt900uk

rrKey Veteran

Scotland

MyPosts All Forum Topic
I had the same problem with my brand new reg. Send it back and they will change it.This Heli Will Self Destruct In Five Seconds!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2006 12:58 PM  14 years ago
SubSailor

rrVeteran

Austin, TX.

MyPosts All Forum Topic
Ironside,
Please call Kurt or Mike at: (503)766-3261 and explain your problem to them. They will take care of you. Let me know if there is anything I can do to help.

John
Fromeco Field Rep.
A day without sunshine is, well.., alot like night time.
SHARE  PM  EMAIL  Attn:RR  Quote
09-05-2006 01:57 PM  14 years ago
Ironside

rrApprentice

Baltimore, MD

MyPosts All Forum Topic
I called yesterday but I guess they were closed due to it being a holiday. I will follow up today and let you all know what I find out.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2006 07:45 PM  14 years ago
JR_Vibefreak

rrApprentice

Bangkok Thailand & UAE Dubai

MyPosts All Forum Topic
Yep I like the Pulling strap!GIXXER4LIFE Philipp
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 653 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Fromeco switch???
Print TOPIC

 3  Topic Subscribe

Tuesday, December 1 - 2:42 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online