RunRyder RC
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1399 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › just got my logo 10 3d kit....question about assembily.
07-22-2006 12:11 AM  14 years ago
quattrokid73

rrVeteran

Huntingdon Valley, PA, USA

MyPosts All Forum Topic
I should've trimmed the servo bays before I put the thing together. Now I have my 9650's, a fully built Logo, and a headache. What method are you guys using to do this? I don't want to get shavings in the bearings so I'll have to create some sort of curtain out of a plastic bag.


Adam

P.S. I am going to experiment with different shapes for my 8s emoli packs to get better weight distribution.
Aero-Model/Hacker Brushless/Mikado 2007
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-22-2006 07:20 AM  14 years ago
Lorents

rrElite Veteran

Oslo, Norway

MyPosts All Forum Topic
Oh, sorry about that - should have mentioned it to you earlier

Instead of using a dremel you could use a sharp carpet knife and carve out the space you need for the 9650's. Then it wont make so much dust.

SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-22-2006 08:21 AM  14 years ago
quattrokid73

rrVeteran

Huntingdon Valley, PA, USA

MyPosts All Forum Topic
So the final setup is

L10 3D

3x 9650
401/9253
R790 RX

1910/1.5Y
CC45HV
HVBEC
8s Emoli

How hot do you think it's going to get? Should I get the metal motor mount?

Also, with a 2200rpm HS, what should I expect with flight times?

Should I consider a lower HS?

Adam

P.S. Jon from Readyheli has been the best helping me get everything right. Without him I doubt I'd have gone into the large e-heli scene.
Aero-Model/Hacker Brushless/Mikado 2007
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-22-2006 09:10 AM  14 years ago
Lorents

rrElite Veteran

Oslo, Norway

MyPosts All Forum Topic
I really recomend the alu motor mount and the alu hex spacers for the frame. It makes the frame more rigid and saves your main gear and main shaft bearings.

2100-2200 is a nice head speed for 3D. I get about 6 1/2 minutes of 3D flying with 7S emolis and the gargantuan 11XL Hacker, hopefully you will get 7 1/2 ish?


What comes around goes around.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-22-2006 12:06 PM  14 years ago
WeatherB

rrVeteran

Toronto - Canada

MyPosts All Forum Topic
Do you plan on flying hard 3D? If not, you can lower the headspeed to around 1600. That's what Mikado recommends for 3D anyway.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-22-2006 02:17 PM  14 years ago
gordo high

rrApprentice

down yonder in the south

MyPosts All Forum Topic
Lorents, does the 3D kit come with the alu spacers, or just plastic/ My logo10 carbon 3D came with the alu spacers in the kit.

I also have a stock logo 10 deluxe, and It would be a lot stiffer with the alu spacers, but considering buying a 3D plastic and using the other for spare parts, (cheaper than buying a bunch of individual parts). Has anyone elso bought a stock kit for parts?
Honey, I just need this one more thing and then I'm set..
SHARE  PM  EMAIL  Attn:RR  Quote
07-22-2006 02:26 PM  14 years ago
Lorents

rrElite Veteran

Oslo, Norway

MyPosts All Forum Topic
Hi,

The 3d kit comes with plastic spacers and motor mount too...


What comes around goes around.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-22-2006 03:01 PM  14 years ago
gordo high

rrApprentice

down yonder in the south

MyPosts All Forum Topic
O'well, so much for that idea. I wish mikado would sell their parts a little cheaper. At least the most common that break easily.

Went out to the field yesterday eve, and landed as it was getting dark fast and the heli was at the far end of my circuit. I guess I landed a little hard and off center and broke a landing bow. I was surprised it broke because from where I was standing it didn't look very hard at all.

Anyway, I guess its all part of trying to get better flying skills, and you can't learn it all on the sim...
Honey, I just need this one more thing and then I'm set..
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <     1     ( 2 )    >    >> ] 1399 views Post Reply
Home✈️Aircraft🚁Helicoptere-MikadoOther › just got my logo 10 3d kit....question about assembily.
Print TOPIC

 6  Topic Subscribe

Monday, June 21 - 5:53 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online