RunRyder RC
WATCH
 1 page 560 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerOther › R90 SE very slow roll rate
07-18-2006 03:26 PM  14 years ago
Topic Vote0Post 1
Heliplane

rrApprentice

Topeka, KS

MyPosts All Forum Topic
R90 SE very slow roll rate
I am running V-blade 690's, 95mm V-paddles, blue dampners with 3 spacers on each side. Was wondering if there is any way to speed up the cyclic other than add the metal flybar control rod and moving the bell mixers. I am still running pretty rich to break in and my head speed is at about 1850 and this thing rolls like a pig compared to my .50. I am running about 9 degree's of cyclic and the swash is almost rubbing on the main shaft at full stick. Any ideas for making it quicker on the cyclic?? Is there anyway to move the bell mixer's on the stock setup??
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-18-2006 03:51 PM  14 years ago
Heli88

rrKey Veteran

Clarkston, MI

MyPosts All Forum Topic
There are hundreds of post's about that in this forum. As search will get you a goldmine of info...
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-18-2006 03:56 PM  14 years ago
Tday

rrKey Veteran

Needham, MA

MyPosts All Forum Topic
here's a great thread. jerry sudimick's synopsis on page two is excellent.

http://runryder.com/t268891p2/?top=1153234495
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-18-2006 11:54 PM  14 years ago
Heli88

rrKey Veteran

Clarkston, MI

MyPosts All Forum Topic
Tday...that's the one I was thinking about!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-19-2006 04:21 AM  14 years ago
Heliplane

rrApprentice

Topeka, KS

MyPosts All Forum Topic
.....
Tday thanx for that link.....I tried the washer mod so I could move the mixer arms in and I also had to change the seesaw screw to a button screw so that the plastic arms don't rub....Going to try it in the morning.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-19-2006 12:16 PM  14 years ago
Tday

rrKey Veteran

Needham, MA

MyPosts All Forum Topic
Please post how it goes. I just bought the metal mixers and am moving mine to the inner hole too. Thinking I'd try that this weekend. Did you end up lengthening the long links a turn to keep your pitch "centered". I get a lot of mileage out of the freya 20 gram paddles, too, btw---much faster then the 95v's and set the swash to max elevator/max aileron and use a cyclic ring to prevent binding.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-19-2006 12:18 PM  14 years ago
TAZZY

rrVeteran

Westfield,MA

MyPosts All Forum Topic
get the 105 v paddles, they work wonders.GDay
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-19-2006 01:56 PM  14 years ago
SPB

rrElite Veteran

Athens - Greece

MyPosts All Forum Topic
Get those blue dampners out of there and replace them with the infinavation ones.

The blues even with the shims are soft so your disk is not that solid as you want for a fast cyclic response.

I have the same setup as yours but with infinavation dampners and the cyclic response is very fast.

Sotiris
myhelis.com Flying Team
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 560 views Post Reply
Home✈️Aircraft🚁HelicopterThunder TigerOther › R90 SE very slow roll rate
Print TOPIC

 4  Topic Subscribe

Thursday, June 24 - 2:02 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online