RunRyder RC
WATCH
 1 page 527 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Help me please with 601 (converted 502)
07-17-2006 10:49 PM  14 years ago
Topic Vote0Post 1
sir777

rrApprentice

Moscow, Russia + Lloret de Mar (Girona), Spain

MyPosts All Forum Topic
Help me please with 601 (converted 502)
Hi, guys! I've recently converted my gy502 to the gy601 (there is a thread on runryder how to do it). I have evo50 with this gyro, 9254 on tail, jr 9x v2. My gain is at 36%. When I turn on the receiver, everything goes ok, gyro says "gy601" and "hello". And after that in AVCS mode it slowly drifts to one side, in normal mode it doesn't. I haven't flown it yet, everything is on the bench. Is it ok? If it is not, I can think of only one reason for that: my gyro sensor(although it is mounted using 2 foam tapes and a metal plate between them) is mounted in the front on the top of another digital servo (9451) and close to the gyro control amp. It could possibly cause some noise, I think. I haven't tried mounting sensor in another place yet, will try later. Anyway, I will try to fly it tomorrow very carefully and will tell you the results. Thanks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-17-2006 10:51 PM  14 years ago
sir777

rrApprentice

Moscow, Russia + Lloret de Mar (Girona), Spain

MyPosts All Forum Topic
And I don't have any revo mixes, sub trims and so on.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-17-2006 11:32 PM  14 years ago
Ilkka

rrNovice

Oulu, Finland

MyPosts All Forum Topic
Hi,
One issue comes in my mind: 9254 on tail?!? Did you utilize "secret" menu to disable "760usec servo" -support? If not then you should have 9251 or 9256 servo for tail or otherwise you run into troubles.

Ilkka
SHARE  PM  EMAIL  Attn:RR  Quote
07-17-2006 11:37 PM  14 years ago
sir777

rrApprentice

Moscow, Russia + Lloret de Mar (Girona), Spain

MyPosts All Forum Topic
I changed the pulse to WID in the secret menu.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-21-2006 12:13 PM  14 years ago
sir777

rrApprentice

Moscow, Russia + Lloret de Mar (Girona), Spain

MyPosts All Forum Topic
Guys, it turned out that some component was burned out inside. The man in my LHS changed it and now everything is working as it should!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 527 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Servo - Gyro - Gov - Batt › Help me please with 601 (converted 502)
Print TOPIC

 2  Topic Subscribe

Wednesday, June 23 - 3:38 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online