RunRyder RC
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 8105 views Post Reply
Home✈️Aircraft🚁HelicopterPhotos and Videos › Raptor Titan 50 3D video
07-18-2006 02:04 AM  14 years ago
Motions

rrVeteran

Tallahassee, FL

MyPosts All Forum Topic
I guess you told on yourself._______
Scott M
Team Mikado USA
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
07-18-2006 10:10 AM  14 years ago
IAF

rrApprentice

Israel

MyPosts All Forum Topic
how is it linear if the he doesnt even have the ball links on the arms that are parallel to each other
I'm sure that the arms of the servo and carburator are parallel to each other when in midle throttle. The picture is taken when the throttle is close and because the links are crossed the links won't be parallel exept when in 50% throttle. It sure looks nicer when the links are not cross so they stay parallel at all time but for practical use there is no difference. As long as the throws are the same from close to open
End points are 105/105 which is as linear as possible.
the movment is linear no metter if the links are crosed or not.
But it will look nicer if the link wuld be to the bottom of the carburator so the arms are parellel at all time.

BTW nice flying and nice thrutle curves considering u are not using governor yet
Have a nice day :)
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-18-2006 02:35 PM  14 years ago
BisonFlyer

rrKey Veteran

Winter Garden, FL

MyPosts All Forum Topic
you guys really dont understand that if you believe what u are posting... the fact that the linkage is crossed is not the main issue.. its that the ball links arent on the parallel arms of the horn. that being the case, the paths of the balls are on different arcs, and therefore the movement is not linear. this isn't rocket science guys.Art Hughes
SAB Heli Division~Byron Fuels~Mikado V-Team~Scorpion~Pulse~Xpert Servo~Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-18-2006 03:21 PM  14 years ago
IAF

rrApprentice

Israel

MyPosts All Forum Topic
BisonFlyer,
When the links are crossed it is posible for the horns of the servo and carburator to be parellal only at one point of the throttle movment (think about it for a sec).
Now if the point where they are parellal is at the 50% throttle then the geomotry of the movment is linear.
Have a nice day :)
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-18-2006 03:28 PM  14 years ago
BisonFlyer

rrKey Veteran

Winter Garden, FL

MyPosts All Forum Topic
no it is not, bc the arcs that the ball links travel are on different planes, so even if they are parallel at one point, the rest of the travel they arent and the movement isnt linear. Regardless, i am done with this retarded argument, though. its so obvious to anyone that knows wtf they are doing that the setup isnt linear. if u guys dont realize that i can only imagine what the rest of ur setups must be like. lets just end this retarded discussion.Art Hughes
SAB Heli Division~Byron Fuels~Mikado V-Team~Scorpion~Pulse~Xpert Servo~Kontronik Drives
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-18-2006 07:30 PM  14 years ago
Doug L

rrVeteran

Minnesota

MyPosts All Forum Topic
Great Flying Chris!


And your throttle seems to be working just fine
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-20-2006 03:07 AM  14 years ago
ChrisT88

rrVeteran

FL

MyPosts All Forum Topic
No mention of the filter being backwards? Don't worry, I turned it around...we're safe!


Heres another clip from the day after the first video. I got the throttle curves tweaked a little better

http://media.putfile.com/Raptor-502
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-20-2006 03:16 AM  14 years ago
bob576

rrNovice

Florida

MyPosts All Forum Topic
sweet flying man. idk all this talk about linear/non-linear linkages....whos evers right it dont matter, the heli still flys great!! great vids!The 5 ?'s...
Does it fly? How fast? How High? How far? How much
SHARE  PM  EMAIL  Attn:RR  Quote
07-20-2006 04:56 AM  14 years ago
Heliscat

rrApprentice

Dublin, CA

MyPosts All Forum Topic
I would have to agree with both parties - it runs great without a governor and that in itself takes a skilled hand at tuning. However, in the name of helping others, if someone else who was just beginning saw the setup he or she might be a bit confused at the link. I was always taught that the balls should be equidistant (is that a word?) from the fulcrum of the throttle and servo and link should be parallel. You managed to do it your way and it seems a bit confusing but works very well too. by the way, nice flying.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-20-2006 05:01 AM  14 years ago
Doug L

rrVeteran

Minnesota

MyPosts All Forum Topic
Another great video! Thanks for sharing!

As per the throttle linkage. Is Throttle throw ever really linear? If the Throttle body is round then the amount it opens is greater in the center than at the low or high end for the same amount of throw.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-20-2006 05:01 AM  14 years ago
VOLTES V

rrNovice

Mother Earth

MyPosts All Forum Topic
nice one!My Homepage Shows How I Feel About The Aurora Avant
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-31-2006 10:00 PM  14 years ago
JitsuGuy

rrKey Veteran

Tulsa, Oklahoma

MyPosts All Forum Topic
Great Vids man!
SHARE  PM  EMAIL  Attn:RR  Quote
07-31-2006 10:06 PM  14 years ago
Jason Bell

rrElite Veteran

California

MyPosts All Forum Topic
dude u did ur pitch push pull wrong

right now its push, u need the other side of the servo for the Push Pull!!!!
AMain.com
Mikado "V Team"
Xnova Motors
Optipower USA
RCProPlus
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-31-2006 10:38 PM  14 years ago
AnnihilaT

rrKey Veteran

The Netherlands

MyPosts All Forum Topic
Haha! It never ceases to amaze me the information people will offer about your setups - even after being shown a demonstration of a machine which seems to be flying just fine.



A day without sunshine is like, well, night.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-31-2006 10:57 PM  14 years ago
Motions

rrVeteran

Tallahassee, FL

MyPosts All Forum Topic
If you had read the thread from the beginning you would have seen that he was not finished with the push/pull setup.

Nice flying.

Also, the throttle setup is correct if your flying with a mode 2 transmitter.

...I just couldn't help myself.
_______
Scott M
Team Mikado USA
SHARE  PM  EMAIL  HOMEPAGE  Attn:RR  Quote
07-31-2006 11:31 PM  14 years ago
Doug L

rrVeteran

Minnesota

MyPosts All Forum Topic
Chris, whats your headspeed?
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
08-01-2006 08:11 AM  14 years ago
Jason channing

rrNovice

Essex uk

MyPosts All Forum Topic
The geometry looks correct to me.if you allow for angular displacement of the servo, clockwise and anti clockwise. Bring the servo back to vertcal and so the throttle arm will return to the vertical as well.
SHARE  PM  EMAIL  Attn:RR  Quote
08-01-2006 08:59 AM  14 years ago
Muse Rocker

rrApprentice

Deinze, Belgium

MyPosts All Forum Topic
the next curtis younblood
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2006 03:32 AM  14 years ago
ChrisT88

rrVeteran

FL

MyPosts All Forum Topic
Thanks for all the positive comments guys. If you have any questions about the setup be sure and read the entire thread.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-02-2006 03:53 AM  14 years ago
Mark C

rrKey Veteran

Houston, TX - USA

MyPosts All Forum Topic
Most excellent flying!!! I agree on all the geometry this yada yada non-liear that. I say to all that! The proof is in the video. That bird was a rockin!

Excellently done!

Mark C.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 8105 views Post Reply
Home✈️Aircraft🚁HelicopterPhotos and Videos › Raptor Titan 50 3D video
Print TOPIC

 14  Topic Subscribe

Thursday, June 24 - 3:27 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online