Wanted to try High Govenor mode with my Castle 35a. I first download the latest bios into the esc using castle link. Then following the instructions from Trextuning.com I set up for govenor mode. There is 2 problems.
1) The motor pulsates in Normal (2210rpm), Idl 1 (2350rpm), Idl 2 (2460rpm). The higher the head speed, the worse the pulse gets. Using a Sky Tack you can see the head speed is not steady. How do you stop the pulsating?
2) When spooling up the start up is (soft) and runs up to 0-45-45-45-45. But if I was landing and needed to throttle up all of a sudden it spools up way too slow! Just a touch below #2 point and your screwed. Is this the way govenor mode works? How do you correct this? The settings I used for the esc was from http://www.trextuning.com.
Thunder Power 2100 pro
Dimention Eng. Park BEC 6v.
Any ideas boys?