RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 393 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › astro motor
02-13-2006 02:01 AM  12 years agoPost 1
wungsxr1000

rrNovice

hollywood fl

My Posts: All  Forum  Topic

what pinion are you guys running on a 3 cell setup with the astro?

PM  EMAIL  GALLERY  Attn:RR  Quote
02-13-2006 02:40 AM  12 years agoPost 2
HONDO

rrNovice

Tucson Az.

My Posts: All  Forum  Topic

I am running a 13T with good power and 7-10 min flights.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-13-2006 03:12 AM  12 years agoPost 3
Jay Mowl

rrApprentice

Owosso Mi. USA

My Posts: All  Forum  Topic

I'm running the 11th 8-10 min motor is so hot you could fry an egg on it. I have tryed a 12 with same results. Motor does not seem to be as strong as I had hoped. Can't Imagine that motor with a 13th. Good luck with yours.

PM  EMAIL  Attn:RR  Quote
02-13-2006 03:23 AM  12 years agoPost 4
HONDO

rrNovice

Tucson Az.

My Posts: All  Forum  Topic

My motor is barely warm to the touch after a hard 7 minute beating. I did once have my belt to tight and the motor got really hot but that was the only time.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-13-2006 03:32 AM  12 years agoPost 5
Jay Mowl

rrApprentice

Owosso Mi. USA

My Posts: All  Forum  Topic

Huh! I don't know what I'm doing wrong then, my belt is not tight, meshis good. What speedo are you running? I have the quark. In idle up I'm running it wide open 100 across the board.

PM  EMAIL  Attn:RR  Quote
02-13-2006 04:05 AM  12 years agoPost 6
wungsxr1000

rrNovice

hollywood fl

My Posts: All  Forum  Topic

WHAT HEAD SPEED ARE YOU GETTING ON THE 13T

PM  EMAIL  GALLERY  Attn:RR  Quote
02-13-2006 04:05 AM  12 years agoPost 7
HONDO

rrNovice

Tucson Az.

My Posts: All  Forum  Topic

I have the Align 35 running a governor at 98%.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-13-2006 04:29 AM  12 years agoPost 8
Jay Mowl

rrApprentice

Owosso Mi. USA

My Posts: All  Forum  Topic

Okay thanks! i don't know whats going on, I guess I will next look into some of the programming options. In the Quark there is a programming mode for torque selection and right now I have it set to the soft setting maybe if I turn that up it will give me some more power, as far as the heat I don't know whats going on. I hope to figure it out.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 393 views POST REPLY
HomeAircraftHelicopter
e-
Align
Other › astro motor
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, June 20 - 12:46 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online