RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 703 views POST REPLY
02-12-2006 05:15 PM  12 years agoPost 1
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Putting together a 12S system with the Actro 34-3 and CC110HV esc. Any advice on how to connect motor to esc - large gold bullet connectors or wire to wire solder?

Although Castle Creations reccomends a direct connection I've used gold bullet connectors in the past with my Schulze and Jazz controllers up to 10s without a problem, so I'm thinking that it would probably work here as well?

Any advice is greatly appreciated.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2006 03:40 AM  12 years agoPost 2
HugeOne

rrKey Veteran

Quebec, Canada

My Posts: All  Forum  Topic

If the connectors can carry the current why not?
What amp draw? and what diameter of the connectors?

Raptor e620 w/V-bar, Tango 45-06, Phoenix 85HV, TrueRC 12S1P 4000mAh

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2006 04:11 AM  12 years agoPost 3
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

I checked with Castle Creations and they reccommneded the 5.5 gold bullet connetors that are on the Neu motor site. They are large enough to accommodate the 10 AWG wire connected to both ends of the controller.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2006 04:13 AM  12 years agoPost 4
f_sea

rrApprentice

Los Angeles

My Posts: All  Forum  Topic

Wow.... after looking at the spelling in my last post, I need to pay closer attention to the keys that I'm hitting.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 703 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, June 22 - 3:02 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online