RunRyder RC
 4  Topic Subscribe
WATCH
 1 page 909 views POST REPLY
02-12-2006 02:39 AM  12 years agoPost 1
fleckstar

rrNovice

bermuda

My Posts: All  Forum  Topic

hi, i received my reflex and did not get any info withit ,does it come with a manual or not , can any one send me a copy in a pdf file if possible
thanks ....

PM  EMAIL  Attn:RR  Quote
02-12-2006 06:53 AM  12 years agoPost 2
Micro-Maniac

rrElite Veteran

Pasco,Washington Formerly: Captain Chaos

My Posts: All  Forum  Topic

The manual is in hyper text form and can be accessed from the help menu.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-12-2006 09:44 AM  12 years agoPost 3
Andy Hinton

rrNovice

Cheshire, United Kingdom

My Posts: All  Forum  Topic

Hi I am using JR2610 with Relfex XTR and having problems with channel assignment. Rudder OK, throttle and elevator not assigned correctly, ailerons OK.

The setup is not very intuitive advice needed please, I am new at this.

Andy

PM  EMAIL  Attn:RR  Quote
02-12-2006 10:44 AM  12 years agoPost 4
Saint728

rrProfessor

Honolulu, Hawaii

My Posts: All  Forum  Topic

Set your channel assignments like this, it should work for your transmitter.

Tail Rotor 4
Elevator 3
Aileron 2
Pitch 6
Autorotation 1
Gyro Sensitivity 5

Take Care,
Cheers, Patrick

Check the hotties in my Gallery
http://rc.runryder.com/helicopter/gallery/9019/?all=photo

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-12-2006 01:41 PM  12 years agoPost 5
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

When you go to the Assign channels... dialog, there are instructions that show up at the bottom. Follow them and you will be most of the way there. It sometimes get confused on the throttle and pitch channels, since they are mixed. If this happens just assign them manually after following all the instructions.

PM  EMAIL  GALLERY  Attn:RR  Quote
02-12-2006 05:33 PM  12 years agoPost 6
Steamy

rrApprentice

UK

My Posts: All  Forum  Topic

Andy Hinton
bud all you should have to do is install the sim then plug in ya usb dongel,and just set the TX to heli
plug in ya hand set and thats it ..you dont have to ajust any setting at alll in the transmitter just assign channels when you start the sim
if it doesnt work then you will have to do this
un plug your lead from the hand set (your transmitter) unscrew the black bit (the bit that plugs in the back of ya transmitter) in their is 2 x wires ,,unsolder and swap them over to the opposite conection re solder and try again it will alll work
it takes 5mins to do and worked For me and my JR2610
let us know the outcome for others to see

ooh my god ,, i spent all the shopping money on helis DOH!!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2006 09:03 AM  12 years agoPost 7
Andy Hinton

rrNovice

Cheshire, United Kingdom

My Posts: All  Forum  Topic

Reflex XRT Sound Issues
Guys,

All working great now the only issue I now have is the sound. When it was first installed on PC the sound using Raptor30V2 would increase and decrease with throttle setting now it is constant irrespective of throttle setting! Any ideas why or how to correct it. Everything works fine otherwise.

Sumo

PM  EMAIL  Attn:RR  Quote
03-19-2006 09:45 AM  12 years agoPost 8
nheather

rrKey Veteran

Horsham, West Sussex, UK

My Posts: All  Forum  Topic

Sound

It may not be a problem at all.

I think you are flying a model with an engine governor (pree F5 to check whether the governor setting is checked).

With a governor the engine note doesn't change much - the throttle controls the pitch and the governor just changes the engine speed to maintain the selected RPM.

When you first flew you may have been using a model without governor selected.

Of course it may be something else altogether but this is worth checking first.

Cheers,

Nigel

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2006 11:19 AM  12 years agoPost 9
Andy Hinton

rrNovice

Cheshire, United Kingdom

My Posts: All  Forum  Topic

Sound issues
It was the govenor setting in software setup.

Sumo

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 909 views POST REPLY
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Sunday, June 24 - 8:36 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online