RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 394 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › gryo and esc help!!
02-11-2006 02:12 PM  12 years agoPost 1
snakeman

rrApprentice

...

My Posts: All  Forum  Topic

i have the phoenix 35 and 401 gyro in my trex. the 3rd channel somehow didnt work on the receiver so i sent it in for service. just got it back and i get no response from the heli at all?? no servo movement or anything?? at this point the esc just blinks red and also so does the gryo. so i took out the crystals and notice that there both channel 51 but one says 72-12 and one says 72-7?? is this the problem ?? do i need the same #'s on the crystals. futaba sent me a new receiver and crystal since the one i sent in failed the bench test?? now i get no signal. also i plugged everything back in and now i dont get a red blinking light on my gyro at initial plug in?? i hope i didnt wreck something. is there a way to reset the gyro?? I just bought this equipment a month ago and im having alot of electical problems. i used g3 and tried to hook up the futaba 6EXHP controller to the adaptor plug and the frickn thing wouldnt turn back on?? i had to send that in for service to. i've used futaba in my rc cars and loved them but i just cant get any of this stuff to work correctly?? any help would be great guys. thanks

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2006 03:41 PM  12 years agoPost 2
snakeman

rrApprentice

...

My Posts: All  Forum  Topic

esc
also this is how i have the connector hooked up to the receiver. colors on the phoenix are brown,red,orange the futaba connectors are white,red,black i have the brown-white, red-red, orange-black is this correct?? maybe this is my signal problem??

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2006 04:55 PM  12 years agoPost 3
Dr.Don

rrVeteran

Cedar Park, TX -- USA

My Posts: All  Forum  Topic

NO!

Black=Brown, Red=Red, and whatever the others are go together. Red is always the + power lead. Most mfg's use either black or brown for the - power lead or ground. A variety of colors are used for the signal leads. You probably have not damaged anything. Get your gear rewired and try it out again.

2atlo8

PM  EMAIL  GALLERY  Attn:RR  Quote
02-11-2006 05:15 PM  12 years agoPost 4
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

If I were you, I would get some local help.

TM

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 394 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › gryo and esc help!!
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, June 25 - 5:06 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online