RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 427 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Need some tips on installing Airtronics servos in Raptor 90 pls.
02-10-2006 08:30 AM  12 years agoPost 1
Andreas

rrVeteran

Sweden

My Posts: All  Forum  Topic

Hi.

I'm about to install some Airtronics servos in my 90SE.

On the pictures i've seen from people it seems like some of you are using the outer holes in the servo arm for aileron and elevator.

If i do that, i have to set the ATV to about 60% to avoid binding and it doesn't feel right with such low ATV setting.

So, how do you have your setup?

I would be very greatful for some help about if you're using inner/middle/outer servoare holes, travel adjustments and pushrod length.

It's just the aileron- and elevatorside i have problems with.

Thanks,

Andreas

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 08:50 AM  12 years agoPost 2
DOKEY

rrProfessor

Northamptonshire UK

My Posts: All  Forum  Topic

Its up to you.

I prefer to use 100% ATV or near about, some use long servo arms and a low ATV, which in a mechanical way speeds up the servo movement, but the servo resolution decreases, so there is less precision, overall.

I can not remember which servo hole I used on the Airtronics as they are now sold, but I was using around 100% ATV.

Ryan.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-10-2006 11:04 AM  12 years agoPost 3
Andreas

rrVeteran

Sweden

My Posts: All  Forum  Topic

Thanks for the answer Dokey.

I also prefer to use as close to 100% as possible. In the middle holes i can get around 90% so i guess i have to use that. The inner holes are only about 8.5mm from the center so that's too short.

Andreas

PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2006 11:35 AM  12 years agoPost 4
DOKEY

rrProfessor

Northamptonshire UK

My Posts: All  Forum  Topic

90% rings some bells, looks like your best option, from what you have.

Ryan.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 427 views POST REPLY
HomeAircraftHelicopterThunder TigerOther › Need some tips on installing Airtronics servos in Raptor 90 pls.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, June 25 - 3:36 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online